Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   Iowa Chapter (https://www.ford-trucks.com/forums/forum140/)
-   -   So what's everyone been up to lately? (https://www.ford-trucks.com/forums/390171-so-whats-everyone-been-up-to-lately.html)

fellro86 07-07-2005 05:04 AM

So what's everyone been up to lately?
 
Well, me not a lot, got my truck kind of torn up, and go figure, needed it Monday... never fails. I got tired of guessing how much fuel there is in the tank, so been working at getting the senders fixed, and the leak in my rear tank. Since I seem to have an oddball year for senders, it was too expensive to just buy new senders and fix them, so I have been doing some fabricating to make some J C Whitney universals work. Got one done, gonna have to get back at it and get the other done. While I'm at it, I should fix some other things going on with the truck... otherwise, just keeping up with the garden and fiddling around here on the farm trying to keep from going crazy...

chrono4 07-07-2005 08:26 PM

nothing really to important, got a air compressor, figured that my truck is stuck in 2 low, even if thats not possible on a bw transfer case i think i did it. been scraping alot lately, workin on a couple of riders.

Saurian 07-07-2005 09:45 PM

Looking to sell/finding a car to buy, driving to see the girlfriend 2 and a half hours away, work, and ultimately - busy in church. I could write my doctoral disertation on any of those..

cowboywanabe 07-08-2005 10:02 AM

Honey-do's and work. Since the weather has been so dry, I've been riding the motorcycle every spare moment. Now, if I could just figure out a way to strap the kids on... I won't need the truck till the snow flies!

Came across a nice 76 F150 4x4 the other day. It's at a local mom-and-pop dealer. The guy says he bought it from a buddy who needed the cash. He claims that the 460 is a fresh rebuild with only 500 miles. The truck is very clean, recent paint and newly re-done seat/carpet inside. Best part is it has working factory air that's been retrofitted to R134. The dealer gave me the number of the guy he got the truck from... I'm still debating wether or not to call. Sounds like he won't let the truck go for less than 4K, and I really don't have the extra cash right now, but it sure seems like a nice old truck.

fellro86 07-08-2005 10:27 AM

Watch out for those dogs when you're out riding... my father in law had a wreck Saturday because of a running dog, totaled the bike, broke 6 of his ribs, and his fiance has a shatterd elbow. They're pretty sore, but they survived. This was in town which translates to about 30 mph...
Sounds like a pretty good truck, check out the cab mounts, the fronts always rust up first of anything, then the hood spring mounts are next along with the floor pans.

Hey Saurian, any certain car you are looking for? If you wish, I can keep my eyes out around here... At least you're staying out of trouble, well there is the girlfriend...;)

cowboywanabe 07-08-2005 11:07 AM

Hey fellro,

Sorry to hear about your father-in-law. Between animals and crazy drivers, riding a motorcycle can get a little stressful.
I was pretty surprised when I looked under the truck, I expected to see a lot of rust. But, everything looks great. The only problem spot is on the bottom of the drivers side front fender, there is a bubble starting under the paint. I will probably do a magnet test over the rear wheel wells. I am a little hesitant about the 460 with a 4bbl carb, but, none of the old trucks are that great on gas anyway.

fellro86 07-08-2005 11:54 AM

you could be surprised by the fuel mileage on some, at least compared to todays trucks. I had a 68 Chev that got 12 mpg any time, trailer or not, and had a 400 smallblock in it. My 90 Chev that I had saw a best of 16... I had an 89 Ford 3/4 ext cab that got 12 best, 8 with an empty flatbed bumper pull... 351W 5 speed... and didn't even have that great of power to boot. In retrospect, I think the cat and muffler may have had some to do with that. It all depends what you want to do with the truck though, if the motor fits the bill or not. It also depends on the gears and how you drive it. I have heard of some of the 460's with higher gears getting into the teens back then. Tuning makes a big difference as well. I have seen cases where big motors in vehicles like that get better mileage than the smaller motors because they don't have to work so hard to get going, and keep going.

monsterbaby 07-08-2005 01:06 PM

One other thing ALL 460s had 4bbl carbs on them, and I have seen guys try, and put a 2bbl on them and reduce the fuel economy so that is nothing to worry about.
As far as what I have been upto other than work it's been pretty well posted on this site what I do in all my spare time. The wife just says it's my midlife crisis but that ok cause it's a lot better than some other options for a midlife crisis.

truckertaz 07-08-2005 05:41 PM

Well between working 60+ hours per week I just bought a 82 Honda Goldwing :-X22 Its need the front calipers rebuilt so I will be tackling that Sat after work....If all goes well I will be cruising around sunday :-D Since my wife has the Yamaha Fazer my son can ride on the goldy with me :-X06

Lifted78 07-09-2005 09:28 AM


Originally Posted by monsterbaby
One other thing ALL 460s had 4bbl carbs on them, and I have seen guys try, and put a 2bbl on them and reduce the fuel economy so that is nothing to worry about.

All except the fuel injected ones! <GRIN!>

Cheers!

FarmForward 07-09-2005 10:54 PM

Been fairly busy here. On the farm, the crops have all been put in, hay's been mowed and baled once already, and got a head start on the other million things needing done. At the job in town, inventory's been taken and squared away. Not much shipping out of there this spring and summer (our usual "busy season"), but the management has plenty of "make-work" projects to keep us occupied.

On the home front, been keeping the new Menard's fairly happy with my charge card. Decided it was time for some long overdue home improvement projects... painting the house, doing some landscaping, and renovating a bathroom.

Both trucks running fine, so no worries there.

truckertaz 07-10-2005 05:01 AM

I have a stupid question....

Whats the differance between Hay and Straw?

fellro86 07-10-2005 06:51 AM

Hay is cut for feed, includes grass, alfalfa and clover, straw is baled generally for bedding, generally is from wheat or oats, or some other small grain. Straw is cheap, hay isn't nearly as cheap. Straw also makes good insulation, as long as the critters don't move in...

fordloverf2501970 07-10-2005 08:33 AM

well besides the 98 hours i work a week, i been trying to keep the pool clean for the kids and going back and forth to the hosptial seeing the twins. The truck is running good, but needs the body work done. here is a link to baby pictures..http://opieswedding.tripod.com/twins.html

fellro86 07-10-2005 09:19 AM

sure look a lot like their father... enjoy them, doesn't seem to be long and their grown up.


All times are GMT -5. The time now is 01:59 AM.


© 2024 MH Sub I, LLC dba Internet Brands