Econoline mirrors
I have a set of the original style mirrors there 3 bolts that bolt to the door. my question is a guy I know has a nos one and in the kit it has a round washer with a angle on it. Is there1 for door or just one. Are they the same part no for the mirrors. If I hold them up to the door the passenger side looks correct straight up. the driver side angles towards the front of van. any info or photos would be great. this is for a 63 Econoline
|
|
Thank you. for info.
|
Here is the instruction sheet as well as the template for drilling the holes.
http://econoline.org/docs/61-67_Roun...structions.pdf |
Thanks you Bill. Always a source of unlimited information.
Just checked and my 65 Econoline Van has the Western Style Mirrors but mine do not have the extra arm (Steady / Reinforcement) that goes forward on the doors. And will need to replace my set because they are rusted thru and missing parts. |
Originally Posted by dcf1970
(Post 18782039)
Thanks you Bill. Always a source of unlimited information.
Just checked and my 65 Econoline Van has the Western Style Mirrors but mine do not have the extra arm (Steady / Reinforcement) that goes forward on the doors. And will need to replace my set because they are rusted thru and missing parts. These mirrors (they stick waaay out) were part of the Camper Special package, optional on other F100/350's. Pic (upper) of Western Jr. "Swing Lock" mirrors used on F100/350 & Econoline: https://cimg1.ibsrv.net/gimg/www.for...b47de6236c.jpg |
All times are GMT -5. The time now is 12:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands