Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1968-Present E-Series Van/Cutaway/Chassis (https://www.ford-trucks.com/forums/forum128/)
-   -   1996 E350 SEAT BRACKETS (https://www.ford-trucks.com/forums/1568590-1996-e350-seat-brackets.html)

RedVanMan 01-11-2019 06:45 AM

1996 E350 SEAT BRACKETS
 
I recently bought a 96 e350 that was missing the second row bench. I have since acquired a 2nd row bench but do not have the mounting brackets for it. So far i have had no luck finding brackets for the 2nd row. Any ideas suggestions where i might get some.

JWA 01-11-2019 11:59 AM

Hmmm I had 2nd row seats in my new-to-me 2005 Club Wagon, trashed the seats but kept what I believe are factory mounting brackets. If I had photos of what's needed I might have what you need--free of charge but you'd pay shipping from ZIP 43068.

HTH

RedVanMan 01-11-2019 05:46 PM

So i attached a picture of what i think they would look like. They look like this a u with edges. okay got a picture to load sorry I think it came across huge. This is what I think it should behttps://i.ebayimg.com/images/g/NDcAA...ZM/s-l1600.jpg

RedVanMan 01-11-2019 06:20 PM

The bolts in my van are actual bolts like size 19mm I am not quite sure what the ones in the picture are.

JWA 01-12-2019 04:54 AM

I'm about 99% sure I have those still---let me check and I'll either post back here or PM you. They're currently under a stack of plywood and insulation for the project I'm currently working on to complete before it snows too much more. :)

I'll let you know yet this day I hope.

RedVanMan 01-12-2019 06:30 AM

Okay awesome thank you.

JWA 01-12-2019 05:21 PM

Snow storm hit---it;ll a day longer 'til I can dig out and dig through my 2000 E250 storage unit. :)

RedVanMan 01-12-2019 08:24 PM

Sounds good thanks for keeping me posted.

JWA 01-13-2019 07:14 AM

Here's what I saved from my seat removal project:

https://cimg8.ibsrv.net/gimg/www.for...d588386061.jpg

There appears to be two (2) sets of these which makes sense as I did remove two bench seats. The bolts do thread into the factory nuts welded to the underside of the body.

This is all there is, take it all or nothing---I can't use 'em, they've been laying around about 1.5 years already. I can probably ship these for about $22 most any place in the USA.

PM me with your shipping address and we'll trade PayPal info if you're interested.

HTH

RedVanMan 01-14-2019 07:21 AM

That looks perfect i will be in touch.

RedVanMan 01-14-2019 10:41 AM

I do not have access to pm on this site at this time. Are you able to call or text. My phone is 5 three 0 seven one 0 40 zero nine.

JWA 01-15-2019 03:39 AM


Originally Posted by RedVanMan (Post 18417454)
I do not have access to pm on this site at this time. Are you able to call or text. My phone is 5 three 0 seven one 0 40 zero nine.

What's your time zone? Its 4:37am EST as I'm reading this---not everyone is up at the same time as me! :)

RedVanMan 01-15-2019 04:05 AM

Depends on the day but tonight i am up all night.

JWA 01-15-2019 04:31 PM


Originally Posted by RedVanMan (Post 18419032)
Depends on the day but tonight i am up all night.

Okay I'm asking you specificially where are you located and when is a good time to reach you at the phone?


RedVanMan 01-15-2019 04:58 PM

I am on the west coast (nine seven 02one)so pacific time. I am available to talk until about 3:30 pm pst. after that texting is okay anytime. Tomorrow after 12:30 pm pst if your calling is next best.
​​


All times are GMT -5. The time now is 07:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands