Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1983 - 2012 Ranger & B-Series (https://www.ford-trucks.com/forums/forum35/)
-   -   Has anyone tried one of the single din large screen radios in your ranger? (https://www.ford-trucks.com/forums/1533154-has-anyone-tried-one-of-the-single-din-large-screen-radios-in-your-ranger.html)

fletchb 03-21-2018 04:24 PM

Has anyone tried one of the single din large screen radios in your ranger?
 
I have a '11 Ranger that I am looking into putting in a radio that will link to my phone and wanted one with android auto.

Crutchfield says none of these will work in a Ranger but other people say it will but you have to trim the dash plate out a bit and make some supports.

I was mulling it over and found others with same issue and they talked about a newer kind of big screen radio that is single din and the screen pops out of the radio when in use.


This is one of them. Has anyone tried this in a Ranger and did it fit ok?

I ask because Crutchfield claims even this single din doesn't fit so there must be something funny with the Ranger or their information is simply wrong.

Thanks.

ArmamentDawg 03-21-2018 05:06 PM

They will fit. Crutchfield stated that they would not fit my '05 Explorer but it did.

https://cimg2.ibsrv.net/gimg/www.for...7da1770eea.jpg

fletchb 03-22-2018 10:28 AM

This is not the same type of radio....look at my link. It is a single din, not a double din, yet Crutchfied still says it won't fit

ArmamentDawg 03-24-2018 08:37 AM

I have a single din in my '98 ranger and I bought everything from Crutchfield so I cannot see why they state it won't fit.

Motrukdriver 03-31-2018 11:01 AM

My 96 has what they call a 1.5 din size radio so to put in a 1 din size you need a filler plate/adapter thing. Did they use the same size radio in the 2011?

Motrukdriver 03-31-2018 11:27 AM

How far does that flip out screen extend to the rear when in? Maybe there is internal interference with something behind the radio. I checked the adapter kit thing and it is the same one for the 2011 that I used on my 96 so a single din radio in the opening shouldn't be an issue.

fletchb 04-04-2018 01:18 PM


Originally Posted by Motrukdriver (Post 17896803)
How far does that flip out screen extend to the rear when in? Maybe there is internal interference with something behind the radio. I checked the adapter kit thing and it is the same one for the 2011 that I used on my 96 so a single din radio in the opening shouldn't be an issue.

Maybe that is it , not sure. The fact that Crutchfield claimed every radio I looked at would not fit made me question the reliability of their database. If there is interference, it's probably the 2 upper vents I would think.

Hard to believe that as long as the Ranger was in production, radio choices are so limited.

Motrukdriver 04-04-2018 07:24 PM

Maybe they mean, without saying it, that the radios won't fit unless you have that adapter kit. I don't much care for that goofy little pocket the kit has but oh well, as long as the radio fits. I guess it would be a good place to store the remote control.


All times are GMT -5. The time now is 07:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands