2011-16 F250/350 Reg cab Short Box? 6.7 Diesel
 

Just looking to see if this exists from ford, everything I have found (and I been looking quite a bit today) has all been reg cab long box, starting to wonder if Ford ever made the truck in that config?

Thanks in advance,

Mitch

That would be a very short truck.

https://cimg2.ibsrv.net/gimg/www.for...6fa78b00e6.jpg

Don't think they did. But this is what it would look like, minus the ridiculous wheels. Custom job from diesel cartel on psarmy

Reg cab shorty is available in Mexico, not sure about the 6.7 though.

Man I love that look.

RCSB are available here too, without the 6.7. There's a few around town, even a 2017.

Nope. Not from ford. None of the big 3 build a regular cab short bed 3/4 ton^ for the US. and to my knowledge never have. (Idk about very early models I.e. pre 60's). Custom built or imported. You can't even get a regular cab short bed f150 with the 3.5 ecoboost or anything above an xlt trim level. And haven't been able to for years now.

I saw an article about one. It was a project pickup where they started with a regular cab long box. Then they scored a short box. They shortened up the frame to make it all fit. It was an 04 or 05 F-250.

Neat project. Now sure how useful it would be. Also, there are bobed up super duties at airports used to tugs or to yank around baggage carts or APU carts around.

You're right, I'm an idiot. What I've been seeing are actually F-150s. I'm not used to this same body stuff.

Not an idiot, just mistaken :-drink