New cab braces from classic fabrication came in today!
 

https://cimg6.ibsrv.net/gimg/www.for...5baf4fe60d.jpg
https://cimg9.ibsrv.net/gimg/www.for...3fddc2970b.jpg
https://cimg0.ibsrv.net/gimg/www.for...05be626530.jpg
https://cimg2.ibsrv.net/gimg/www.for...3d589a2d85.jpg
I finally got my new replacement cab braces for my 59 from classichttps://cimg7.ibsrv.net/gimg/www.for...90bd79b39f.jpg
fabrication.com
They measure 20" and 22" long. Sheet metal work and welds are excellent! Worth the $78 each side!

Those look real good. Are you getting the floor pans too?

I already got floor pans from a vendor off eBay. They look to be of decent quality but knowing how well these braces turned out, I would have ordered from classic too.

https://cimg8.ibsrv.net/gimg/www.for...d711b7fc80.jpgMine are uh, kinda shot...

https://cimg3.ibsrv.net/gimg/www.for...011ccea4fc.jpg
I recieved the same cab braces a few years ago. I had to re-make them as they don't fit really.

The pics are the ones I modified.

They don't fit??? Really! Huh...that stinks! Well, if I need to modify then I'll modify. Either way the bottom half of my truck needs work. Thanks for the heads up.

Repop parts almost always need a little massaging. Still better than trying to fab them for most of us.