|
1 Attachment(s)
Here's the bike I bought
|
Originally Posted by MisterCMK
(Post 17328259)
Here's the bike I bought
|
Originally Posted by Racer5349
(Post 17328280)
That's a classic!
|
Good evening guys.
How's everyone been? |
Doing good here Mike. You? You in NC now?
|
Originally Posted by wildstang
You have a smart phone? Can't you talk to type? Bummer you have to wait to get looked at again. How is the new house?
Wouldn’t know about the house yet, supposed to close August 11th if everything works out. Very excited about it, wish it was tomorrow. |
Good evening fellas
Originally Posted by MisterCMK
(Post 17328259)
Here's the bike I bought
Got the King-Queen seat, shaft drive (no oil spots on your bike or clothing from chain oilers) and brakes big enough for a school bus! Got the topper installed today. Took them about an hour and 20 minutes. No test drives either! :-wink The truck rode pretty smooth without any weight in the bed, but with a few hundred pounds worth of topper, I think it rides even smoother... Their sticker was peeled off the back glass about 30 seconds after I snapped the pics.. https://cimg3.ibsrv.net/gimg/www.for...562910656f.jpg https://cimg4.ibsrv.net/gimg/www.for...5d7e803afd.jpg https://cimg5.ibsrv.net/gimg/www.for...357a9fd8ce.jpg https://cimg6.ibsrv.net/gimg/www.for...f08c260807.jpg |
Originally Posted by DieselCamper01
(Post 17328993)
Doing good here Mike. You? You in NC now?
Yes, got here late Tuesday afternoon. |
Truck looks pretty sweet Randy.
Happy Saturday. More house decisions today. |
Morning everyone!
|
Good morning fellas
Thanks Jay! |
Originally Posted by Big-Foot
(Post 17329133)
Good evening fellasDoggoned nice lookin' Scooter Chris!
Got the King-Queen seat, shaft drive (no oil spots on your bike or clothing from chain oilers) and brakes big enough for a school bus! I was surprised to see how much there was for brakes on this thing. I think I need to flush the fluid though and bleed it out, they seem a little bit soft initially but it sure slows down in a hurry! It's high idling again but only when it's hot. I'll have to order all of the rubbers for the carbs and see where that gets me. |
Originally Posted by MisterCMK
(Post 17329916)
Topper looks good randy.
I was surprised to see how much there was for brakes on this thing. I think I need to flush the fluid though and bleed it out, they seem a little bit soft initially but it sure slows down in a hurry! It's high idling again but only when it's hot. I'll have to order all of the rubbers for the carbs and see where that gets me. Yeah - I think brake fluid is the most overlooked maintenance item in the auto/cycle industries... I had a high idle situation that was exactly what you mentioned. Carb rubbers to the cyilnder head. They had gotten hard over the years and the removal and reinstalling of the carbs must have put a couple in the wrong location. I had cracks in a couple also but they didn't look like they went all the way through. Replacing them cured the problem for me... |
Decided on this granite for the kitchen.
https://cimg0.ibsrv.net/gimg/www.for...4ebc05730c.jpg |
Good evening everyone.
|
| All times are GMT -5. The time now is 02:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands