Show off your engines thread.
I haven't seen a thread of just pictures of engines. So show of yours don't matter if it's dirty, clean, painted or broken pictures are a must.
Here's one I'm working on for one of our work trucks Before https://cimg3.ibsrv.net/gimg/www.for...8786f1a3bc.jpg https://cimg0.ibsrv.net/gimg/www.for...60adfc3f72.jpg https://cimg7.ibsrv.net/gimg/www.for...43670e88b2.jpg https://cimg8.ibsrv.net/gimg/www.for...53f9879727.jpg Engine is 99.9% resealed. I wasn't to fond of JD green but like the yellow turbos it grew on me lol.. |
|
I'd love to participate but I really don't have that kind of spare time, to pull my engine out just to get a snapshot then put it back!
|
Engine bay is OK too anything engine.
|
I'll have to grab a shot next time I am under the hood. I'm sure sooner than later I am going to have to pull mine out for some work. Will have to resurrect this thread when the time comes!
|
5 Attachment(s)
Soo, I went ahead and pulled my engine out, took some shots, then put it back in. No problem..:-drink LOL.....
|
mine
https://cimg7.ibsrv.net/gimg/www.for...0b37fd85e6.jpg https://cimg7.ibsrv.net/gimg/www.for...0385f25004.jpg oil cooler and motor mounts painted and installed https://cimg4.ibsrv.net/gimg/www.for...a57c0a9405.jpg https://cimg5.ibsrv.net/gimg/www.for...41406438bc.jpg https://cimg3.ibsrv.net/gimg/www.for...08ef283064.jpg plenums in fuel lines going in,next is Hpop,water pump and the T-4 pedestal and up pipes https://cimg7.ibsrv.net/gimg/www.for...12614f69bf.jpg |
Originally Posted by countrycar
(Post 17079296)
Soo, I went ahead and pulled my engine out, took some shots, then put it back in. No problem..:-drink LOL.....
|
Originally Posted by The Brad
(Post 17082064)
Can you come over and help me get some pics of mine? :-drink
|
Wow, these are some really nice engines. I now have engine envy. Here is the dirty pig I worked on all day Thursday. It'll get there.
https://cimg9.ibsrv.net/gimg/www.for...f30e5f7ea6.jpg https://cimg9.ibsrv.net/gimg/www.for...54c5e2cb0b.jpg It's somewhat cleaned up. When I do the cooling system overhaul next month, it will get a whole lot better. |
Bump... This is no thread without posts or pics. Come on guys/gals.
https://cimg2.ibsrv.net/gimg/www.for...ed2db1795c.jpg https://cimg5.ibsrv.net/gimg/www.for...7c6c21016e.jpg And the goodies https://cimg8.ibsrv.net/gimg/www.for...a14c55bad5.jpg |
1 Attachment(s)
After my Turbo rebuild
|
Here's today's work total work time 1.5 hrs and all that's left is to pull it out.
https://cimg2.ibsrv.net/gimg/www.for...be0cefbeb1.jpg https://cimg4.ibsrv.net/gimg/www.for...71f28632e8.jpg https://cimg5.ibsrv.net/gimg/www.for...a53d629638.jpg https://cimg7.ibsrv.net/gimg/www.for...00f42e511e.jpg https://cimg9.ibsrv.net/gimg/www.for...033b6e9ddf.jpg https://cimg0.ibsrv.net/gimg/www.for...8aa8953324.jpg https://cimg2.ibsrv.net/gimg/www.for...eaa10bf925.jpg https://cimg6.ibsrv.net/gimg/www.for...54a16f39b2.jpg https://cimg9.ibsrv.net/gimg/www.for...6146da6bb8.jpg And installed the old water pump on the "new" engine https://cimg0.ibsrv.net/gimg/www.for...8ffc3d5696.jpg |
Not engine but a good upgrade
https://cimg7.ibsrv.net/gimg/www.for...a7e4029589.jpg Custom coolant filtration system, and boy I couldn't find any space for it, I used the big Baldwin coolant filter same size as the Motorcraft FL820s that the 5.4,6.8,6.2 engines use, and the big aluminum filter housing design for a semi lol.... |
All times are GMT -5. The time now is 03:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands