https://cimg8.ibsrv.net/gimg/www.for...f9ac560fd5.jpg
Locking for Ford 92/93 F-Series Front Bench Red Seat W/adjustable head rest in good condition to install in my 77 F-150. Attached picture is an example of style. PM me. I'm in 93033. Thanks

I'm looking for 92-96 regular cab running boards. The fiberglass(?) ones that came from the factory. Thanks!

Anyone from the Eastern shore of md on here . I'm in need of a driver's side door ,a hood ,original air box with hoses , bench seat no rips if possible . Willing to travel up to 70 miles for these parts I'm located in federalsburg,md cash in hand. Also looking for someone who can do my rear shocks for me and diagnose the play in my front end . Possibly fix once I get the needed parts. I'd do it but seeing how the local druggies stole all my tools from my fiance's mother's shed. I can't do anything .

need a pair of rear tail light housings for a 1988 F250 I am currently between jobs and don't have alot of fundage so the cheaper the better....

thanks

Looking for bench seat
 

I'm looking for a bench seat out of a '92-96 F-series to replace the vinyl XL bench seat in my truck. Preferably grey cloth XLT seat with the fold down center seat. I'm in northern VA but wouldn't mind taking a small road trip to pick up.

1992-1997 F series / Bronco parts
 

Not sure how you could efficiently ship most of this, so pretty much just for the Seattle/Everett guys to do local pick up on.

Cleaning out my storage area.
All pieces are in very good shape- that's why I saved them.

Send me a PM to inquire
.................................................. ..............................
Blue interior pieces (1994+ code V royal):

Drivers kick panel $25
Heater control bezel $15
Lower dash $30
Blue seat fabric for repairs $20
.........................
Blue interior pieces (1992-1993 code B crystal)

Glove box $50
Fuse panel cover $10
.................................................. ................................
Mocha (Tan) interior pieces (92 Eddie Bauer):

Glove box $50
Ash tray $20 (incomplete)
Lower dash $35

Some other 92-97 stuff too- see pictures:
Map lights, A pillar trims, sun visors, horn pad w/ cruise- non airbag, steering column shroud-manual truck w & w/o tilt, OEM bench seat cup holder light gray '94 up, OEM rear step bumper brackets, license lights, trailer plug receptacle , center console cassette/coin storage tray

https://cimg2.ibsrv.net/gimg/www.for...09a915ea55.jpg
https://cimg7.ibsrv.net/gimg/www.for...4b615f0130.jpg
https://cimg0.ibsrv.net/gimg/www.for...05ee8cb709.jpg
https://cimg2.ibsrv.net/gimg/www.for...74b842f6f7.jpg
https://cimg3.ibsrv.net/gimg/www.for...127e36ea28.jpg
https://cimg4.ibsrv.net/gimg/www.for...6b9b1c12da.jpg
https://cimg5.ibsrv.net/gimg/www.for...ffb3977ed2.jpg
https://cimg6.ibsrv.net/gimg/www.for...9dfa1c7998.jpg
https://cimg7.ibsrv.net/gimg/www.for...cc9ea8a664.jpg
https://cimg8.ibsrv.net/gimg/www.for...89a54a2871.jpg
https://cimg9.ibsrv.net/gimg/www.for...174eacc556.jpg
https://cimg1.ibsrv.net/gimg/www.for...555cbdcb2a.jpg
https://cimg2.ibsrv.net/gimg/www.for...82486a1a1d.jpg
https://cimg3.ibsrv.net/gimg/www.for...f8eb111d02.jpg
https://cimg4.ibsrv.net/gimg/www.for...0e15c1843f.jpg

https://cimg7.ibsrv.net/gimg/www.for...77ca470322.jpg

https://cimg8.ibsrv.net/gimg/www.for...5f1881a797.jpg

https://cimg9.ibsrv.net/gimg/www.for...53b19ef717.jpg

https://cimg0.ibsrv.net/gimg/www.for...15a4dcc985.jpg


https://cimg8.ibsrv.net/gimg/www.for...4023d394f8.jpg

Anyone in the Seattle area need a diesel core support? Found this while looking for parts for my front end.

https://seattle.craigslist.org/tac/p...441180310.html

Anyone have a TFI module for a 1988 F250 460 EFI laying around?

E4OD Transmission
 

Hey guys,
I'm looking for an E4OD Transmission to mate with a 302. Pretty sure the bellhousings match for the 300, 302, and 351. It's going into an old '87, so I might need a wiring harness too. If ya got one let me know. I'm in the north Mississippi area. If anyone knows anything about doing this swap let me know.
Thanks,
Henry

Exact same thing here! (And I'm willing to outbid Henry!!! :P)


... just kidding about the outbidding part, although I am really going to NEED a E4OD for my 5.0. It's not a project truck that can sit and wait forever.

looking for dual shock towers and lower cast iron mounts for radius arms for the dual shock setup, located in ottawa ontario , canada

93 F150 Xlt flareside
 

Does anyone know where I can find front flareside bed step covers?

WTB: Nice set of OEM Alloy 8 bolt X 6.5" wheels PN F5TZ1007A
 

These would have been stock on 1994-98 F-250 and F-350 SRW and later on the Econoline Vans. PM me with what you have. Thanks!

Lower EFI intake
 

Need a stock lower intake fr my 89 F250 351W

'94 Lightning Tubular Bumper
 

I'm new here. I hope this is the right place in the forum to ask. I need to replace the rear tubular bumper on my '94 Lightning after a sizable oak tree jumped in front of rearward-launching truck.

I under Smittybilt was the original manufacturer. Nowadays they appear to be Jeep-centered. So can anyone point me in the right direction find a replacement? I'm not sure even where to begin to restore this Lightning... but I'd sure like to try. So maybe with your help I can! :-)

Thanks for any advice you can provide -

Michael
'94 Lightning