Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1987 - 1996 F150 & Larger F-Series Trucks (https://www.ford-trucks.com/forums/forum28/)
-   -   1987 - 1996 Ford trucks, parts for sale and wanted. (https://www.ford-trucks.com/forums/1481754-1987-1996-ford-trucks-parts-for-sale-and-wanted.html)

Fomoko1 03-20-2017 12:44 PM

1987 - 1996 Ford trucks, parts for sale and wanted.
 
Post ads here as they are not allowed in tech forums.

MR KROGOTH 03-26-2017 08:01 AM

Looking for a driver front door panel for a crew cab truck. All power, any color but Opal grey would be perfect.

stxlt 04-24-2017 08:16 AM

1992 5.0L/302 w ECM and AOD transmission for sale
 
Truck had 70,317 miles when parked in October 2015. I pulled the engine and trans as an assembly in Jan 2017. The engine had a fresh oil change the day before the owner parked the truck in Yemassee, SC for a bad front wheel bearing. Scavengers relieved the Ignition system; No evidence of oil burn or leaks. Wiring harnesses were cut for wire color/id and connector retention.


Included:
beyond Long block engine
ECM
Water Pump
Alternator
Power Steering pump
AC Compressor
Trans Fluid Cooler
AOD trans


I am asking $850 for the combo or make an offer. Acquisition is your responsibility. I do not have equipment to lift the assembly onto a delivery truck. I will sell the 2013 5x10 trailer upon which the assembly rests for an additional $850.
I am in Beaufort, SC, 29902. Send an email to [email protected] WITH YOUR PHONE NUMBER.

fordf350man 04-30-2017 06:13 PM

For anyone in the DFW area. If needing a smaller part I can ship if it will fit in a USPS flat fee box. Make me an offer on anything I have listed, worse I will say is no.

Items not pictured:
  1. 1993 F150 XLT Parts truck - has blown 302, good E4OD, 3:55 axles with manual hubs. Interior is gone except door panels and dash, Front Bumper Gone, Alloy wheels gone (has rollers on there if you want to buy the truck whole), cruise control servo gone.
  2. Borg Warner manual shift transfer case (out of wrecked 92 F150)

OEM Front Dual Shock and upper spring perch mount off wrecked 1992 F150 4x4
https://cimg7.ibsrv.net/gimg/www.for...7d671906c3.jpg

Used Bugflector no cracks/no mounting screws
https://cimg8.ibsrv.net/gimg/www.for...c8cc2703f5.jpg


New Monroe Gas Shocks with mounting hardware - they are new but sat in the back of a parts trucks in the weather for about 6 months
https://cimg9.ibsrv.net/gimg/www.for...9ebe8b84b6.jpg

Leer Camper - Clear Coat is peeling, carpet on roof, no keys. Needs paint and one fiberglass crack that is starting to form sanded and patched.
https://cimg0.ibsrv.net/gimg/www.for...336b27fe22.jpg


Complete under hood wiring harness off 92 F150.
https://cimg1.ibsrv.net/gimg/www.for...6e31428139.jpg

Good Alternator off 93 Bronco, pulled for 130amp 3G alternator upgrade (has explorer pulley on it so you will need to re-use yours)
https://cimg2.ibsrv.net/gimg/www.for...09b1ec369d.jpg

Heads in the middle are stock 302 E7 heads. They will come bare. Unknown mileage. A guy sold them to me for $10. So next person can have them for $10. The other heads pictured are not for sale.
https://cimg3.ibsrv.net/gimg/www.for...7f4cab700f.jpg

Rich G 05-04-2017 10:47 AM

WTB a good shape intrument bezel and drivers door armrest

dobber13 05-05-2017 08:23 PM

1996 F150 Radio
 
Anyone have the stock radio they want to sell?

jeepcj559 05-08-2017 03:08 PM

2 Attachment(s)
Aftermarket tail lights $15
Pre-runner bar LED lights NOT included $100
Front and rear seat from a 1997 F350 XLT crew light brown in decent shape No Tears. Power lumbar $300 ( I will add pictures this weekend

MR KROGOTH 05-08-2017 08:00 PM


Originally Posted by fordf350man (Post 17155431)
For anyone in the DFW area. If needing a smaller part I can ship if it will fit in a USPS flat fee box. Make me an offer on anything I have listed, worse I will say is no.

How much for the bed cap?

fordf350man 05-08-2017 08:09 PM

Asking $250 for the bed cap. PM if your interested. Can send more pics if you need.

Bronco638 05-12-2017 03:45 PM


Originally Posted by fordf350man (Post 17155431)
New Monroe Gas Shocks with mounting hardware - they are new but sat in the back of a parts trucks in the weather for about 6 months
https://cimg9.ibsrv.net/gimg/www.for...9ebe8b84b6.jpg

Would you be willing to ship the shocks to Chicago? I can make it real easy; I can mail/email a shipping label to you for either UPS or FedEx. All you would have to do is box up the shocks and drop them off at a UPS or FedEx facility OR you could give the box to a driver (if you encounter one on a regular basis, like at work). Let me know if you'd be willing to do that and we can discuss price and payment. Thanks, Dave.

fordf350man 05-15-2017 03:19 PM


Originally Posted by Bronco638 (Post 17185805)
Would you be willing to ship the shocks to Chicago? I can make it real easy; I can mail/email a shipping label to you for either UPS or FedEx. All you would have to do is box up the shocks and drop them off at a UPS or FedEx facility OR you could give the box to a driver (if you encounter one on a regular basis, like at work). Let me know if you'd be willing to do that and we can discuss price and payment. Thanks, Dave.

Hey Dave,

Private messaging you now. Can send UPS.

Azryael 05-16-2017 12:08 AM

Looking for a ZF5 and transfer case for my 7.3 to replace the E4OD.

The closer to San Antonio, the better.

HiddenHollow 05-19-2017 12:23 PM

For sale down in Houston TX
 
https://houston.craigslist.org/cto/6136511255.html

this is my truck but my father is handling the sale since im in VA

TexasGuy001 05-19-2017 03:50 PM

I know that this is probably just a shot in the dark. I'm looking for an Edelbrock 3881 Performer 5.8 truck intake setup for the 351 that I am building. If you happen to have one you aren't going to use, please let me know.

hector311 05-20-2017 05:01 PM

Looking for door panels and dash board bezelfor '95 single cab


All times are GMT -5. The time now is 07:06 PM.


© 2019 MH Sub I, LLC dba Internet Brands