4 speed manual slip yoke question
im almost sure that my 1982 f100 has what is called a "NP-435" however im not sure. it has a 4 speed manual. anyways, when the driveshaft was removed on the truck for a potential freeze plug change it was never put back on and was threw on the back of the truck and laid in water for about 15 years so naturally its rusted all to pieces.
Im having a hard time finding one SPECIFICALLY for a 1982 f100, so my question is will ANY 28 spline yoke work in this transmission or am i gonna have to hunt and hunt to find one that came out of one of these trucks? i tried to do some research myself but came up fairly empty handed, i guess this isn't a normal issue lol. |
I have an 82 F100 also w/4spd 300IL6
Im guessing that you have the 300 IL 6 motor I would think that the drive shaft would be pretty easy to come by in a recking yard that depends what state you live in Car-Part.com--Used Auto Parts Market this is a pretty good way to find parts |
Measure yours - or the length needed if yours is too far gone - look at the yokes and then go shopping. Even finding one specifically from a 1982 F100 doesn't guarantee anything, what with the possible combinations and sizes used during the era.
Typing with better grammar & punctuation would be appreciated, it's easier to read & comprehend. |
Originally Posted by ctubutis
(Post 16875842)
Measure yours - or the length needed if yours is too far gone - look at the yokes and then go shopping. Even finding one specifically from a 1982 F100 doesn't guarantee anything, what with the possible combinations and sizes used during the era.
Typing with better grammar & punctuation would be appreciated, it's easier to read & comprehend. |
Originally Posted by Jakemcswaggins
(Post 16875233)
I'm almost sure that my 1982 F100 has what is called a "NP-435" however, I'm not sure. :-huh It has a 4 speed manual.
Anyway, when the driveshaft was removed on the truck for a potential freeze plug change, it was never put back on and was thrown in the back of the truck and laid in water for about 15 years, so naturally it's rusted all to pieces. The slip yoke won't be specific for a 1982 F100, it will have other applications as well. But, you have to know for sure which tranny it is, because the slip yokes are different. TRANS code printed on the Certification Label, glued to the left door face below the latch. Post what it is. |
All times are GMT -5. The time now is 10:14 AM. |
© 2024 MH Sub I, LLC dba Internet Brands