Wheels, hard bed cover, bed slide
https://cimg3.ibsrv.net/gimg/www.for...40321f152.jpeg
https://cimg2.ibsrv.net/gimg/www.for...0c92c53a6.jpeg https://cimg1.ibsrv.net/gimg/www.for...239d1c79c.jpeg https://cimg0.ibsrv.net/gimg/www.for...aa9d10423.jpeg https://cimg9.ibsrv.net/gimg/www.for...553a4d33d.jpeg https://cimg8.ibsrv.net/gimg/www.for...0c22cdf12.jpeg https://cimg7.ibsrv.net/gimg/www.for...d03505cd0.jpeg Location is Denton, TX, 76208 Old school turbines. 8x6.5 pattern, 16.5"x9.75" $300 Bigger holes, 8x6.5 pattern, 16.5"x9.75" $100 Smaller holes with rivets, 8x6.5" pattern, 16.5"x8.25" $200 The shiny ones are factory 8x170mm $100 Hard bed cover for 92-97 short bed, a little weathered but all the pieces are there. $300 Bed slide out for short bed, a little weathered but can be rattled canned back to looking new again. $400 Make offer in Messenger. Will make bundled prices. I am open to trades. Currently looking for 5 new 16.5x37 BFGs https://cimg6.ibsrv.net/gimg/www.for...9debc47a7.jpeg |
Sorry about the sequence...working from a phone.
|
Do you ever come near houston?
|
Originally Posted by Jjona5
(Post 16520290)
Do you ever come near houston?
|
The small hole with rivet rims are pending pick up Sunday.
|
"The shiny ones are factory 8x170mm $100" Are these 16.5" too or some other. I could use some 16's and I'm in No. Texas.
|
Originally Posted by coyoterun51
(Post 16521767)
"The shiny ones are factory 8x170mm $100" Are these 16.5" too or some other. I could use some 16's and I'm in No. Texas.
|
Pickup fell through. All are still available. Also available are 5 recentered H1 wheels.
|
All times are GMT -5. The time now is 09:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands