1950 F1 E-brake lever mounting help
 

So. I bought a 1950 F1 that had been stripped for a frame off rebuild and the cab was gutted. I do have the e-brake lever assy that goes in the cab but no hardware. I don't see any holes that line up with the lever bracket. Does someone have a link or pick of how the lever assy is supposed to be mounted in the cab?

Thanks in advance for your help!

Kurt


https://cimg3.ibsrv.net/gimg/www.for...7cacde5dea.jpg

Here's a pic of my brake I just put back in last week
https://cimg5.ibsrv.net/gimg/www.for...aced16af80.jpg

It didn't show the lower

Thanks!! Some mud daubers had made a nest in the upper bracket under the dash and it had been painted over. Got to probing around and found the holes. Then had to make a trek to Home Depot for some 5/16 X 24 thread bolts! Got it in. Now just have to buy the cables. Thanks again for the pics!!

Kurt

-----------