REMOVING EXHAUST MANIFOLD
 

I have 2004 f250 6.8 v10 would like some insight on removing exhaust manifolds
Thankyou
Dave

Here's some posts that include stock 2V V-10 manifold removal during header installs. :-X22

https://www.ford-trucks.com/forums/1...ll-w-pics.html

https://www.ford-trucks.com/forums/1...r-dummies.html

Lots of PB Blaster and cursing..

Done a few 5.4's, never the 6.8 (same idea though)

It's tight and tricky, and a lot of the studs will break. Kind of a pain to remove them if they break off not leaving some sticking out...but the key is having patience, the right tools, and time to do it.