New Disk Brake Conversion Kit for 66 F100
 

This Kit was bought new about 6 years ago and the truck it was meant for was sold before the brakes were installed. I believe everything is here though I'm not completely sure. Included are New calipers, rotors, caliper brackets, brake pads, hoses, Power 2 chamber master cylinder, spindles, bushings zerk fittings, wheel bearings. I'll even include a brand new set of steering linkages. These parts can be picked up in Jersey City NJ. There is over 100lbs of parts here and I don't have the wherewithal to easily box all of this up so I would have need to charge for packing materials etc if the buyer arrangeshttps://cimg9.ibsrv.net/gimg/www.for...9c851a96ee.jpg

https://cimg1.ibsrv.net/gimg/www.for...9a0abb3682.jpg

https://cimg2.ibsrv.net/gimg/www.for...b3039154dc.jpg

https://cimg3.ibsrv.net/gimg/www.for...05589ef153.jpg

https://cimg4.ibsrv.net/gimg/www.for...cdda9d4aa0.jpg

https://cimg5.ibsrv.net/gimg/www.for...2133aa9c0a.jpg

https://cimg6.ibsrv.net/gimg/www.for...a2fda3a02e.jpg

https://cimg8.ibsrv.net/gimg/www.for...8b3479c00d.jpg

https://cimg2.ibsrv.net/gimg/www.for...2f92432f67.jpg

https://cimg3.ibsrv.net/gimg/www.for...603b8177c3.jpg

shipping.

it was looking good , did not see picture of spindles

You're right I made a mistake. I meant new king pins.