67 flat bed
i am working on my 67 f-250 flat bed the engine is out of a 91 and the original intake and exhaust is on the 300 six.got everything to work except no fuel pump yet and it overheats rather quickly. it sat in the guys field for a few years so i am thinking the radiator might be plugged,changed the thermostat and the water pump. need a electric fuel pump and a fan shroud it is a four speed manual tran, it also needs some body work mostly rusted out body parts. the guy before me rebuilt the diff and i put in new u joints and a used 4 spd tranny,the truck was free just had to tow it 100 miles.it's for sale make me a offer:oval
|
:-jammin:-jammin:-jamminPics
|
HE's BACK!!!!!
|
I'm putting a flatbed on my 71 cummins powers highboy
|
Nice I been debating the same on my 71 cummins crew
|
with the 300, be sure to use the proper water pump for the belt type. The serp belt setup spins reverse to the v-belt setup. Each has their own waterpump.
|
Originally Posted by crazed87bronco
HE's BACK!!!!!
|
Originally Posted by 351Cleveland C4
(Post 15737848)
Wonderful....
|
yes probably just to entertain you and make you feel supirior. it has a water pump for a v belt,don't know if it is the right one or not.
|
All times are GMT -5. The time now is 04:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands