Ford Truck Enthusiasts Forums - Cell Phone Mount installed (PANAVISE GROUP BUY THREAD)

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)

- Excursion - King of SUVs (https://www.ford-trucks.com/forums/forum29/)

- - Cell Phone Mount installed (PANAVISE GROUP BUY THREAD) (https://www.ford-trucks.com/forums/1384112-cell-phone-mount-installed-panavise-group-buy-thread.html)

Quote:

Originally Posted by Technologiq (Post 15470614)

Here is where we are at with pricing:

Panavise 751072399 Mount/Bracket: $16.48 (normally $32.95)
15585 PortaGrip Phone Holder with T-Button Tipper: $12.58 (normally $24.99)

I do know that they use UPS Ground to ship. I did different scenarios for shipping and it ranges from $10 on the low end (West Coast) to $13 on the high end (east coast)

Let me know if you guys are still interested. I know this put's it closer to the Amazon pricing since the one reseller is doing the mounts for $20).

If there is still enough interest I will create a signup sheet so you can give them all your information as well as the parts you want.

Side note: Potentially I could pick up everyones orders and send them out USPS flat rate small box for $5.75 if you don't mind that I'd remove the boxes they come in to make them fit. I have to make sure they'd fit and that everyone was comfortable with this. There is also the fact that I could just collect the money myself, buy everything and then ship it out to you but that sounds like something I would regret :) I'm seeing if there is any break to me doing this.

I'm in for the mount/bracket x2. If you could help on shipping that would help me out as I'm on east coast. Thanks for checking and setting it all up also.

I'm still in for both pieces. Thanks again!

Yep, I'm in for the whole contraption :-X22 :p

I'm also on the East Coast, so I'm up for whatever you decide to do to help out with shipping ;)

Let me know what and when and how to pay.

Thanks for getting this going! :-X22:-jammin

in in as well and in the midwest. lmk where to send the $ to. thanks for doing this!

Ok, since it sounds like most of you are OK with me collecting the money and sending them out I'll start working on that.

Just need to figure out a way to make sure it will fit in the USPS Small Flat Rate Box and then it will be fairly easy. I'm also looking into just doing 1st class to make it cheaper but need to account for packing materials if i go this way (fortunately my wife ships a LOT of stuff on eBay so it wouldn't be a big deal)

Put me down for one of each of the following:

751072399 - 2000 Ford Excursion
I-75113-802 - 2008 Chevrolet Colorado
I-75127-199 - 2003 Mazda MPV

I'm still browsing their work vises for my electronics workbench.
Also seeing if any of their Miata accessories can be adapted to my Mazda RX-7

Tell your buddy to upgrade the web server. It's horrendously slow and keeps timing out.

Quote:

Originally Posted by Pele (Post 15473253)

Tell your buddy to upgrade the web server. It's horrendously slow and keeps timing out.

Yeah, probably only 150,000 of us FTE guys hitting it all at once, LOL!

:-drink

Quote:

Originally Posted by ExPACamper (Post 15473264)

Yeah, probably only 150,000 of us FTE guys hitting it all at once, LOL!

:-drink

You all stop doing that. I'm trying to get all 20 slots filled on my own. :)

How/where/when are we signing up for this? Not pushing, but don't want to miss it, either :-drink

I will have a signup sheet set up this evening for y'all

Quote:

Originally Posted by Pele (Post 15473253)

I'm still browsing their work vises for my electronics workbench.

Yep... Lookin at:

Model 324 - Electronics Work Center - $100
Model 350 - Multi-Purpose Work Center - $100

But I might break it down into parts...

(2x) Model 305 Base - Lower Profile. Same Cost. - $27 each
(1x) Model 315 Circuit Board Holder - $40
(1x) Model 376 Self Centering Wide Opening head - $60
(2x) Model 312 Parts Tray - $24

Can your guy make custom orders out of off-the-shelf parts?

Quote:

Originally Posted by Technologiq (Post 15481391)

I will have a signup sheet set up this evening for y'all

Your homework is overdue!

Man, I have been using a 'spider' holder for the last couple years in several cars. You basically bend it the way it holds your phone AND attaches to a vent or any other ridge that holds it. In the EX I made it so that it sticks inside the cupholder and holds my phone. I think they come in seveal sizes. one for phones and one for tablets.
It's so flexible that it fits any phone and it can be bend to mount anywhere.
And when you change phone or car, you adjust it.
Around 15 bucks last time I saw them at the checkout isle at fry's electronics.
Best and cheapest holder I've had.

Quote:

Originally Posted by Technologiq (Post 15481391)

I will have a signup sheet set up this evening for y'all

Did I miss the signup?:-wink