Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   Excursion - King of SUVs (https://www.ford-trucks.com/forums/forum29/)
-   -   pic request: stock height, wide wheel stance? (https://www.ford-trucks.com/forums/1376465-pic-request-stock-height-wide-wheel-stance.html)

ufvj217 04-30-2015 10:16 PM

pic request: stock height, wide wheel stance?
 
looking for pics of any excursions with a wide wheel stance, but no lift.

wide, like these:

http://cimg.carsforsale.com/294390/2...94DB0694_3.jpg

http://i.ytimg.com/vi/5j749bra-qE/maxresdefault.jpg

thanks!!

AlaskanEx 05-01-2015 12:12 AM

ugly, reminds me of a low rider. Hydros and 13" wire wheels baby!

WE3ZS 05-01-2015 06:42 AM

Make sure that that type of stance (not my cup of tea) is even legal where you are (you don't have your location filled in....;)), here in PA having tires extend past the outermost body line is a no-no.

bcrewcaptain 05-01-2015 07:10 AM

west coast people can chime in, big out that way, oh, and any shops that specialize in ball joint work :D

Krazee Matt 05-01-2015 10:15 AM

I was wondering how long it would take for that ****ing stupid ass 'stanced' look to trickle it's fugly way into here....

Lemme take my rig and throw the most idiotic rims I can on it, but not make the wheels wider just have them offset -9,647,122. Then I'll pull all them b!tches while throwing debris and **** all over the ****ing place behind me and rooster tail so bad in the rain I mine as well be shooting water hoses straight behind me onto people's windshields. I lost the original windshield in the Chevelle when some stanced jackass kicked a construction barrel sideways on the freeway - wheels sticking out farther than a dually and didn't have room to fit past it. Idiot.

But that's just my opinion.

WE3ZS 05-01-2015 10:36 AM


Originally Posted by Krazee Matt (Post 15319620)
I was wondering how long it would take for that ****ing stupid ass 'stanced' look to trickle it's fugly way into here....

Lemme take my rig and throw the most idiotic rims I can on it, but not make the wheels wider just have them offset -9,647,122. Then I'll pull all them b!tches while throwing debris and **** all over the ****ing place behind me and rooster tail so bad in the rain I mine as well be shooting water hoses straight behind me onto people's windshields. I lost the original windshield in the Chevelle when some stanced jackass kicked a construction barrel sideways on the freeway - wheels sticking out farther than a dually and didn't have room to fit past it. Idiot.

But that's just my opinion.


So Matt, I take it that this mod is your next job, or maybe when the new springs go in? }>

Krazee Matt 05-01-2015 11:22 AM

You know it Tom! Going to run those stretched low-profile mud tires too!

Hellaflush JDM stance nation!

I'M GOING SO STANCED IT'LL BE TOUCHING THE LINES OF THE LANE B!TCHES!!!!!!!



gag


To be on subject, I don't think the stance-tastic rims work on a bone stock height Excursion. I don't believe there's room in there for the front wheels to turn...

Stewart_H 05-02-2015 01:46 AM


Originally Posted by bcrewcaptain (Post 15319135)
west coast people can chime in, big out that way, oh, and any shops that specialize in ball joint work :D

For the Dodge and Chevy guys, I think it's a prerequisite.

There's a ton of mostly Dodge trucks running around here like the one in the pic below.
http://www.xtremediesel.com/images/p...pull3_edit.jpg

Buh-fugly


Originally Posted by Krazee Matt (Post 15319795)
You know it Tom! Going to run those stretched low-profile mud tires too!

THAT'S what was missing from that fugly ass shipoopie body kit truck!!

Stewart

mecdac 05-02-2015 05:53 AM

^^^^ Reminds me of the icon in my Garmin GPS ^^^^

:-X13:-X13

After 23 seconds off road I wouldn't be able to see out of my side windows.

WE3ZS 05-02-2015 08:05 AM

But think of all the time we would save waxing our rigs, with those stanced out tires the paint will get so trashed it wouldn't be worth it to wax it any more! WIN-WIN! :-X19

LivingLarge 05-02-2015 08:39 AM


Originally Posted by Krazee Matt (Post 15319620)
I was wondering how long it would take for that ****ing stupid ass 'stanced' look to trickle it's fugly way into here....

Lemme take my rig and throw the most idiotic rims I can on it, but not make the wheels wider just have them offset -9,647,122. Then I'll pull all them b!tches while throwing debris and **** all over the ****ing place behind me and rooster tail so bad in the rain I mine as well be shooting water hoses straight behind me onto people's windshields. I lost the original windshield in the Chevelle when some stanced jackass kicked a construction barrel sideways on the freeway - wheels sticking out farther than a dually and didn't have room to fit past it. Idiot.

But that's just my opinion.

Matt, I look forward to reading your post. You are brutal with your opinions and I absolutly love it!!!! :-hair

A Rodder 05-02-2015 12:40 PM

^^^^^No kidding!
On a more important note, is there pics of the new interior?

Krazee Matt 05-02-2015 07:32 PM


Originally Posted by LivingLarge (Post 15321840)
Matt, I look forward to reading your post. You are brutal with your opinions and I absolutly love it!!!! :-hair

I'm glad some of y'all get a kick out of it, lol. In all honesty, I think your wheels are as far as I would ever go for offset. Not ridiculous but not riding inside the fenders either. I like a lil tire sticking out, but like Stewart said it's primarily the Cummins guys that roll around 'bro truck' style with 3/4 of their tires hanging out there.

Yet I get a ticket because I don't have mudflaps... bah.

Stewart_H 05-02-2015 11:37 PM


Originally Posted by Krazee Matt (Post 15322824)
I like a lil tire sticking out

Me too. :-X04

http://i59.photobucket.com/albums/g3...ps26e10f34.jpg

Stewart

nmclella 05-02-2015 11:50 PM

As was mentioned check your local laws, might be required to run some serious fender flares


All times are GMT -5. The time now is 12:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands