Metal plate
 

Hello,


Does somebody know where we must place this metal plate as show in the picture?
We're almost at the end of our Ford truck restoration and searching where to place this part. (We've bought this truck in parts and haven't dismount this truck)

Note: This part was also delivered, but couldn't belong to this Ford.

Many thanks in advance for any reply,


Gert.

https://cimg7.ibsrv.net/gimg/www.for...25fc6d1d60.jpg

https://cimg2.ibsrv.net/gimg/www.for...34a9ebc2ff.jpg

can,t say where that part goes! but you have a real nice truck:-X22. may say some measurements for size !

I too can't see where the part would be fitted. But would love to see more pictures of your truck and the bed. Stu

I think that is the bracket for a heavy duty air cleaner. It would bolt onto the driver's side head. The oblong hole is for a spark plug wire to pass through. Here is a picture of an engine with a heavy duty oil filter installed:
http://assets.hemmings.com/story_ima...00-0.jpg?rev=2

It is installed on this incredibly nice 40 Marmon-Herrington station wagon:
http://www.hemmings.com/hcc/stories/...e1427076490084