FS: Rust Free 73-79 Sheet Metal in Upstate NY! Cab, Doors, Fenders, Hoods, Etc. F150 F250 F350
 

These are all parts for a project I've been working on, but I just bought a truck from the West coast...so, I have decided to sell all the rust free body parts I've been collecting over the past few years. Everything (but the cab corners) are OEM Ford parts and most have either come from down south or from California. If you're in the northeast, save yourself some time and money and start with these.


Cab – 1978 F250 non-AC, regular cab with factory clearance lights, completely rust free. Floors/firewall/underneath all sandblasted and primed. The following body work was done by a professional shop ($1150 was spent on just labor and materials) - cab corners were replaced with Tapco replacement corners (best on the market), couple small steel patches welded in floors and rear panel (95% of the floor boards are original), all dings/dents worked out, and seams sealed. Ready to be finished for primer and paint. $1000 obo.

Doors – SOLD

Fenders – RH and LH fenders that are completely rust free (came from California), no holes for trim, nice and straight. $100/piece, also have a nice OE LH fender with a couple minor dents and a small area of surface rust (no rot) for $50. LH fender from California SOLD

Hoods – Two rust free hoods off 78/79 F150’s, FORD letters on front, no dings/dents/or rot. One is really nice with the original brown paint $150, the other has the original red paint with some minor surface rust, $100 Brown hood SOLD


Tailgate – rust free in good useable shape with handle and internal parts, shows use with some dings etc. $100.

I have a ton of other parts I've been collecting over the years as well. I've parted five 1978/79 F150's and F250's in the past 3 years and I have a ton of good useable interior/exterior/drivetrain/engine parts including a 77.5-79 F250 4X4 Regular Cab Frame, glass, gauge clusters, grilles, headlights, core supports, wheels/tires, dash parts, door parts, hinges, etc. If you don't see it listed pm me with your needs. Located in Binghamton NY area.


http://i265.photobucket.com/albums/i...psviza4mxl.jpg


http://i265.photobucket.com/albums/i...ps3loyqfjk.jpg


http://i265.photobucket.com/albums/i...psgdgzfjth.jpg




http://i265.photobucket.com/albums/i...psbcdf2aqq.jpg


http://i265.photobucket.com/albums/i...ps3ca1a91e.jpg

hey man im not to far away from binghamton and i have a 1994 f240 super cab long bed that need some things. shoot me a PM or a text so we can see if you have some things i need.numbers 19147600358

twinzilla we've exchanged messages before. i'm about 2 1/2 hours away from you and would love to hit your place this spring to poke around and see what you have.

Sorry bud, I don't think I have anything that would work on your 94 (except maybe a rear window)...all the stuff I have is 73-79.

I'm hoping to build a large shed this year to organize my parts collection and get everything in one place...right now I have stuff stashed all over lol. It'd be hard to poke around with everything boxed up and/or buried behind 50 other things. x(

Sale pending on cab and RH fender from Cali...still have some good rust-free stuff for you northeast guys.

need good driver's door shipped to Maine?

Doors are sold, cab is sold, all my fenders except for the red one pictured are sold, and there is a sale pending on the tailgate and red hood.

Hood and tailgate sold.


I will have another nice cab ready to go in about 2 weeks. This one is a regular cab off of a 78 F250, no cab lights and no AC...has the original paint on it still.
There is a little rust on the driver's side floor (nothing serious), a little on the bottom of the back panel, and a spot on the bottom of the A-pillar where it meets the rocker on the passenger's side. It's a really solid cab and would only take some minor patch work to get it back to 100% rust-free status. Asking $500 obo for this one. Will post pics when its ready to go.

Ford cab
 

interested in the cab u still have can u send pics of it in its current staus i can do the work myself please call or text me at 570-691-7927

do you have any 78-79 grill shells with no dents or dings?

I do have a nice 78/79 grill shell with no dents or dings. Where are you located?

I am located in Texas. 78221.

Do you know how much shipping would be and how much would you want for it

I'm asking $150 for the shell but it looks like shipping will be almost as much (just got a quote for $135.60 to ship to Texas.

Yeah that's gonna be too much for me. I'd do the 150 but that shipping is killing me, thanks for your time. I guess I'll keep looking around here in Texas.

truck parts
 

do you have a steering column for a 79 4x2 3 speed manual?