Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1994.5 - 1997 7.3L Power Stroke Diesel (https://www.ford-trucks.com/forums/forum170/)
-   -   Crew cab factory exhaust hangers/brackets (https://www.ford-trucks.com/forums/1339580-crew-cab-factory-exhaust-hangers-brackets.html)

coreyallan01 10-05-2014 02:38 PM

Crew cab factory exhaust hangers/brackets
 
Afternoon fellas, i just got my Diamond Eye 5" system and i was looking at the install this afternoon. My issue is that the truck already has a 4" dual system on it and there are only two factory brackets and hangers left utilized from the install all others are missing. The one at the cat is still there and the one following that is still there, after that nothing. The diamond eye utilizes the factory hangers and brackets so i need to grab some. Does anyone have any part#s, leeds, or know if Ford still carries them? If nothing else can someone take some pics of their original hangers/brackets so i have some pics to go on?
Thanks!

oldbird1965 10-06-2014 09:22 AM

I would probably go to a junk yard.

coreyallan01 10-06-2014 10:31 AM


Originally Posted by oldbird1965 (Post 14719528)
I would probably go to a junk yard.

Thanks Glenn.. That'd b my first choice but unfortunatly they are few and far between up here..

ReBilld 10-06-2014 03:20 PM

Corey, the hangers on EC and RC trucks are the same. If you could find one being parted out maybe you could grab a few.

coreyallan01 10-06-2014 03:55 PM

1 Attachment(s)

Originally Posted by ReBilld (Post 14720355)
Corey, the hangers on EC and RC trucks are the same. If you could find one being parted out maybe you could grab a few.

Thanks! I stopped by the dealer today and found that surprise surprise Ford doesn't carry them anymore tho, he did print me off the schematic showing what I needed because I had no idea what I was looking for. I stopped by carquest, Napa, and O'Reilly, all of which didn't carry the brackets. I drove a little further south today and stopped at a pick a part junk yard, they had a few OBS F-Series trucks, looks to me that the f150, 250, 350 and possibly the bronco all have the same type of hangers. Everything I looked at was totally rusted out. When I got home I found the part# F3TZ-5260-B on ebay and bought it, but I couldn't find the part# F4TZ-5260-B, a T shaped bracket that bolts to the rear cross-member above the rear axle. I'll attach a pick of what I need. If you look in the picture you'll see it's shown twice in the lower right pics.

madpogue 10-06-2014 04:14 PM

These guys: BRACKET [F4TZ5260B] - USD $37.22 : White Racing Products, LLC - mostly carry old 'Vette parts, but they have some Ford NOS as well. Might also try Dennis Carpenter and/or the Bronco Graveyard.

coreyallan01 10-06-2014 04:49 PM


Originally Posted by madpogue (Post 14720450)
These guys: BRACKET [F4TZ5260B] - USD $37.22 : White Racing Products, LLC - mostly carry old 'Vette parts, but they have some Ford NOS as well. Might also try Dennis Carpenter and/or the Bronco Graveyard.


Appreciate it but that ad is from 2012, I found it on a Google search too...I called this afternoon. He's out of stock.
I'll try the Bronc graveyard..


All times are GMT -5. The time now is 04:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands