banks gen II with cowl ind. - looking for pic
 

Anyone done cowl induction on a banks gen 2 with round filter. Much thanks to all these turbo install threads. Will be a great help when i tackle mine.

here ya go.oh this was before the intercooler,but no matter.shows what your after.

Thanks 250.

sure no problem.someday im going to rework the whole ducting.the banks plastic shroud; they made it so it doesn't really seal.the shroud slides over but it's clearly no seal.it just a mostly fits lol (imho,this is banks gen 2's only flaw in the setup.) there is a crack around the whole back.the cowl is pressurized and of course you want this pressurized air to be at the air filter.the only to get that is with a solid seal.then the ducting isn't a perfect seal either of course and then the flex tubing isn't ideal yet again.so it's really no where near like id prefer it yet.........just so much time.if....ah screw that lol when i get my nice large heated shop i can tackle these more slightly trivial buggers in the winter when iv got lots of time.anyway,just so you know where i see my flaws.

It aint huge but i got the heated insulated shop 24x28.