Anyone have a picture of an original jack for a 50 f1
 

I got a jack with my truck , but it is a bottle jack. I don't know it that is right. Let me see what you have. Thanks.

It is a bottle jack. Should have a home in the base for a mounting screw to go through it and attach to the floor. Look for a corresponding hole in the floor on the right side behind the seat.

https://cimg7.ibsrv.net/gimg/www.for...00fb706328.jpg
Jack and hole to mount

https://cimg0.ibsrv.net/gimg/www.for...7344f995dc.jpg


Screw to hold jack rt side

Well, I guess I was wrong about this one, but thinking about it, most of these trucks didn't come with a rear bumper so they couldn't have used a bumper jack. Mine has the hole in the center of the base and the base is not flat, sort of rounded up on a four sides, but I do know ford used a lot of different suppliers. Thanks for the enlightenment.

D3TZ-17080-C (replaced 8C-17080-B & 8C-17080) .. Bottle Jack-1 1/2 ton mechanical / Obsolete

1948/52 F1/F2 / 1953/86 F100/250 / 1975/91 E100/250 / 1978/86 Bronco.