Backup lights
 

I placed two universal license plate lights in the bed top rolls with hotter bulbs. The switch I used was a generic push in and out with a stock knob to use manually when I back up. I placed this all in the throttle hole with the bezel also. Will update the pic in the truck of the stock knob look. Chris


https://cimg4.ibsrv.net/gimg/www.for...b1fbddb3cd.jpg

I like it. What does it look like without the lights on.

I will post a pic of it tomorrow;but, it as the 1/2 silver dome on top with the other 1/2 (bottom) dome plastic at the bottom.

Here is what it looks like during the day!


https://cimg6.ibsrv.net/gimg/www.for...e4e51bac9b.jpg

They look good!