Oil on MAF sensor (05 Navigator)
Hey all,
I have an 05 Navigator. I had some rough idle issues, like on one red light engine would idle a little rough (RPM is fine though) and after few miles of driving on another red light engine would idle just fine. So I thought cleaning MAF sensor might help solve the issue. Long story short; I pulled the sensor out and noticed it had some oil around it. I've uploaded a video on YouTube showing where the oil is. Also, I've taken some pictures of the filter. I also noticed a oil-like stain on the polyester part of the filter. Did anyone had a similar issue before? I have no idea why/how oil might reach that height. My initial thought was faulty PCV sensor, but AFAIK this engine does not have one (it's different than 03-04's, which has the PCV hose on the passenger side of the engine). Any idea is appreciated. :-X22 Edit: Filter is like 3000 miles old MAF Sensor: Filter & Sensor location: https://cimg6.ibsrv.net/gimg/www.for...1698554179.jpg https://cimg7.ibsrv.net/gimg/www.for...48ab5d799a.jpg https://cimg8.ibsrv.net/gimg/www.for...ae0fa160b6.jpg |
All times are GMT -5. The time now is 11:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands