80-86 parts, 92-97 parts alot
Okay
Name is Matt, Located in Cincinnati Ohio Pm me or reply to this Small Parts can be shipped, will ship bigger stuff also, both on the buyers dime. Trucks the parts came from: have an 86 f250 2wd reg cab long bed rolling chassis minus fuel system. has a carb 460 with a c6 behind it, has the big studs for the wheel studs, it is the heavy Gvwr. motor runs flawlessly and trans shifts awesome, truck has 50k original miles on it, we bought it for its body and don't wanna junk the power-train. will put a link of the build thread so you can get an idea of how the 86 was taken care of.https://www.ford-trucks.com/forums/1...-xl-build.html next is a 85 f250 2wd reg cab long bed red in color NO AC. has a 351 HO and c6 trans. Not a clue what condition the trans is in, and the 351 needs a rebuild, i believe the bottom end is fried. pretty sure odometer is rolled and it reads around 19k. So truck does not run and drive, has been sitting for 10 years some miscellaneous parts from the uncles 84 250 with 351 and 4 spd No AC. very low amount of parts from this, power train was used in the rebuild of the truck as was the whole chassis. interior is fried blue, which we would like to keep the bigger pieces, and body was rotted fairly bad, again see build thread posted above for condition this truck was in. And lastly is a 97 hd xl AC 250 reg cab long bed 4x4 460 5 spd. Seat belts sold already. Transmission, steering wheel and shroud and other parts related to swapping an auto out for manual are NOT for sale, because i am putting the 5sp in my 97, but parts from my 97 will be available such as the e4od, pedals, pcm, trans hump, cross member...... cab is spoken for off this truck. has grey interior parts available. dash is good, seat is junk. bed is freaking beat to death. not sure what interest will be but if ya see something, ask!!! prices I have no clue on really since not sure what interest will be. Will say 1200 for 86 rolling chassis, interior parts 15-50. body parts 60-90, grille pices10-20-30, random pieces ........ depends what it is.... just ask, trucks will be going to scrap when spring rolls around. The fenders off the 85 are really nice, the core support is starting to rot but i believe a sandblasting and it is solid. cab floor on 85 is starting to go , doors are starting also, bedsides are decent but drivers side is starting the rust over rear wheel well. the 86 chassis is in great structural form. the 97 is in good structural shape, fenders are nice and core support is rotted. here are some pics The 86 chassis: http://i778.photobucket.com/albums/y...pse97f632a.jpg http://i778.photobucket.com/albums/y...ps6c673f28.jpg http://i778.photobucket.com/albums/y...ps33b35d67.jpg The 85 f250 red: http://i1328.photobucket.com/albums/...psf6d9a239.jpg http://i1328.photobucket.com/albums/...ps1b7383a6.jpg http://i1328.photobucket.com/albums/...ps34efe27b.jpg http://i1328.photobucket.com/albums/...ps64bf46c6.jpg http://i1328.photobucket.com/albums/...psf577aaab.jpg http://i1328.photobucket.com/albums/...ps40843665.jpghttp://i1328.photobucket.com/albums/...ps7b30191e.jpg http://i1328.photobucket.com/albums/...psdcbea457.jpg http://i1328.photobucket.com/albums/...psfeaa0b5f.jpg http://i1328.photobucket.com/albums/...ps058d4b64.jpg http://i1328.photobucket.com/albums/...psa27bf33d.jpg http://i1328.photobucket.com/albums/...psa85548ed.jpg http://i1328.photobucket.com/albums/...pse4fad54e.jpg http://i1328.photobucket.com/albums/...ps346c9db2.jpg http://i1328.photobucket.com/albums/...psf8207d98.jpg http://i1328.photobucket.com/albums/...psf891ad68.jpg http://i1328.photobucket.com/albums/...pse00bf8ae.jpg http://i1328.photobucket.com/albums/...ps185971e3.jpg http://i1328.photobucket.com/albums/...ps8754addf.jpg http://i1328.photobucket.com/albums/...psb94494bd.jpg http://i1328.photobucket.com/albums/...ps14c18b56.jpg http://i1328.photobucket.com/albums/...psbe8f601b.jpg The random left overs from 84:(visor and hood not for sale) http://i1297.photobucket.com/albums/...ps857d3ddc.jpg http://i1297.photobucket.com/albums/...ps639acbd3.jpg http://i1297.photobucket.com/albums/...pscb433e8d.jpghttp://i1297.photobucket.com/albums/...psf4b42776.jpg http://i1328.photobucket.com/albums/...psfc7cce27.jpg http://i1328.photobucket.com/albums/...ps5d599a76.jpg http://i1328.photobucket.com/albums/...psccc3e36f.jpg only have pass side headlight bezel from 84 and grille upper and lower. the drive side bezel has broken tabshttp://i1328.photobucket.com/albums/...ps3d507283.jpg unfortunately only have 3 of these hubcaps but they are all in perfect shape http://i1328.photobucket.com/albums/...ps31a45110.jpg Lastly the 97 f250 4x4: http://i1328.photobucket.com/albums/...psaef45542.jpg http://i1328.photobucket.com/albums/...ps17fe39c0.jpg http://i1328.photobucket.com/albums/...ps7df7f8e7.jpg http://i1328.photobucket.com/albums/...ps70209765.jpg http://i1328.photobucket.com/albums/...ps38c46c5c.jpg http://i1328.photobucket.com/albums/...ps488e1e77.jpg http://i1328.photobucket.com/albums/...ps0490b749.jpg http://i1328.photobucket.com/albums/...ps626d9247.jpg http://i1328.photobucket.com/albums/...psbcf44db3.jpg http://i1328.photobucket.com/albums/...ps222de61a.jpg http://i1328.photobucket.com/albums/...pscd493a5f.jpg |
I need a couple frame crossmembers. The one that the cab sits on. Do you have one of those in good shape. And the core support mounts i need a pair thats not rusted out.
|
Originally Posted by fordka
(Post 14014161)
I need a couple frame crossmembers. The one that the cab sits on. Do you have one of those in good shape. And the core support mounts i need a pair thats not rusted out.
|
Ok thanks. The bare frame trucks arnt any good
|
Originally Posted by fordka
(Post 14014953)
Ok thanks. The bare frame trucks arnt any good
I know the core support ones are spiffy clean on that frame though |
Alright. Well when ever you get those cabs off just let me know. Thanks.
|
Originally Posted by fordka
(Post 14016415)
Alright. Well when ever you get those cabs off just let me know. Thanks.
|
I'm interested in the 1997 fenders. How much for the pair?
|
Originally Posted by 83capril
(Post 14021710)
I'm interested in the 1997 fenders. How much for the pair?
will need some time to get em taken off though |
I'm going to send a private message and we'll chat there.
|
Do you have the gray radio bezel from the red truck?
|
Originally Posted by 1985 Bronco
(Post 14025815)
Do you have the gray radio bezel from the red truck?
|
If they are good can you DM me a picture and a price, does it have a clock?
|
Originally Posted by 1985 Bronco
(Post 14029648)
If they are good can you DM me a picture and a price, does it have a clock?
|
did you get any pictures?
|
All times are GMT -5. The time now is 09:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands