i got a pair of plastic inner fenders off my 95 f150. not the best condition have a few cracks and holes broke out but free to anybody that wants them.
also looking for a tailgate with the imprinted letters in good shape and willing to pay or anybody thats got a good set of 33/10.5/15 tires id be willing to pay too. |
Originally Posted by fordka
(Post 11726008)
i got a pair of plastic inner fenders off my 95 f150. not the best condition have a few cracks and holes broke out but free to anybody that wants them.
also looking for a tailgate with the imprinted letters in good shape and willing to pay or anybody thats got a good set of 33/10.5/15 tires id be willing to pay too. |
fudimanuchi, add the front pump for the E4OD, 96 should be the updated one, my trans is a 1990, but I will be ultimately using a 1995 EEC so I can run a MAF SEFI setup on my 460.
|
I need MAF swap parts for my '92 5.0/E4OD. Anything would be greatly appreciated. I believe I have the airbox leftover from my bronco, but need an engine/computer harness, and a computer, and a MAF sensor and air temp sensor! :-X04
|
will have some nice corner (stock) lamps here in the near future (work is currently putting me on 10hour shifts :( ) work permitting a day or two to get them out and putting my Euros in...can also send any amber bulbs and clear bulbs (3157/3167 and 194s ) if anyone wants them...with any of the houseings (turns, corners, ect).
also will soon have headlamps as well if anyone wants them (can be restored still) |
I will take them if they will fit a 96 F-250.
|
Originally Posted by bruno2
(Post 11732228)
I will take them if they will fit a 96 F-250.
ill let you know when i got time to get them off :) |
Cool thanks Jamie!
|
np id rather have parts reused then in a land fill
|
I have a low mileage BW 1356 t-case. Slip joint rear output, no speedo cable hole. ( it has a factory plug in the hole) I'm in Baltimore, you come and get it- you can have it. The scrap yard doesn't give enough to make recycling it worth while, so maybe someone else can use it/keep it for a spare.
|
i need a tan screw tab for the pass side kick panel. broke the head off today and i need another. let me know if you got one thanks
|
Well scouring local craigslist and junkyards to no avail. Still looking for a 92-97 front bumper with air vents...
|
Guess I should put something up here for free instead of being greedy and asking for things, lol. Got a ladder/lumber rack that's on my 95 f250 supercab that needs to be gone asap had it on craigslist for awhile with no interest. It's homemade from the construction company I bought the truck from. Anyone want it let me know. So if anyone nearby come get it. If not going to scrap it.
|
In need of a good dash for a '92 to '96. Any color but red will do. Grey now but some p/o cut it full of holes.
|
I guess my in search of part is the tube from the core support to air filter box on a 88/ 94, F250/350 ... 460/4.9 6cyl I think that's right mmmm??? Dave
|
All times are GMT -5. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands