I appreciate it. A lot more people on this forum... Let me know how the project goes.
|
Originally Posted by Evan_P
(Post 11607208)
I appreciate it. A lot more people on this forum... Let me know how the project goes.
|
Originally Posted by mustangsallysdad
(Post 11604077)
I need a complete spare tire mounting assembly for a '96 F150...need everything but the spare itself. Thanks.
Where are you located? I'm in southern California, north Orange County. I have 2 sitting in my garage collecting dust. For everyone else, I have a set of aftermarket aluminum 16.5" rims. Only 3 have tires, 33x12.50 all terrains. I have a spare on a steel wheel to go along with them. Free to anyone from the forum! As for something I need; does anyone happen to have a 3.55:1 ratio ring and pinion for an IFS Dana 50? I'm trying to ditch the 4.10's but can't find any 3.55's for the front (haven't talked to the stealership yet though). |
Originally Posted by ghanson
(Post 11607346)
Where are you located? I'm in southern California, north Orange County. I have 2 sitting in my garage collecting dust.
For everyone else, I have a set of aftermarket aluminum 16.5" rims. Only 3 have tires, 33x12.50 all terrains. I have a spare on a steel wheel to go along with them. Free to anyone from the forum! As for something I need; does anyone happen to have a 3.55:1 ratio ring and pinion for an IFS Dana 50? I'm trying to ditch the 4.10's but can't find any 3.55's for the front (haven't talked to the stealership yet though). |
Front left headlight bezel and clear turn signals off 93 f350. left side headlight and turn signal bulb fixtures with a few inches of wire on them.
Looking for a black front left fender for 93 f350. |
Needs and wants !!!
I really would like to have some good usable arm rests (L&R) for my 90 F250 "Custom"... tan in color would be perfect, other colors ?? NO RED ... mine broke :'( Dave :-wink :-X22
|
would love a set of hubcaps for a 95-97 F-250, 350 4x4. I'll pay the shipping or let me know where you are. I'm in Nw Mexico.:-X06
|
looking for any type of wood trim that will replace the ugly gray XLT door trim, also running boards for a reg cab XLT '95 long box. Louisville here
|
I have a pair of Corner Lights if anyone needs them
|
timberon, 16" rims ?
|
Originally Posted by 88dually
(Post 11654150)
timberon, 16" rims ?
|
I think i have 3 good ones an 1 not too good. I'll look around in the morning
|
I'd appreciate that a lot. I just ordered a set, but i'd like to have some extras in case we break or lose one.
|
How much r they new ?
|
39 at Autozone.
|
All times are GMT -5. The time now is 02:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands