waytallwhitey's engine pull pics
 

Daisy and I are in upstate NY at John's place pulling the engine out of Frank's (waytallwhitey) truck for an oil pan and stuff. I'll post more later - already stayed up tooo late visiting with John.... Here's a couple pics for ya though!!

What it used to look like:
http://i107.photobucket.com/albums/m...psd55c017b.jpg

Still pretty good here:
http://i107.photobucket.com/albums/m...ps08f68382.jpg

Uh oh...
http://i107.photobucket.com/albums/m...ps4d6953aa.jpg

Does anybody know how to put one of these back together?? I hope Frank has good insurance.
http://i107.photobucket.com/albums/m...ps8f0c2657.jpg

Man you flat out don't mess around when it comes to yanking a motor. What is that were the turbo mounts? Thanks for postin pics and sharing what's going on.

That's the 'bucket mod'. It helps keep track of nuts and bolts that have been removed from the engine. :p We had it out picking thru the engine to trans bolts so we could bolt engine to stand.

Today, engine and engine bay will get cleaned and painted, then we'll flip engine over for oil pan replacement. :-X22

Oh yeah, looks like we are gonna need a new CAC. This may explain max of 10psi boost (truck is ALL stock):

http://i107.photobucket.com/albums/m...ps049b9bbd.jpg

Nice very Nice. Was wondering yesturdee how the trip was going.

Later

Subscribed and interested....

How come you took off the front end?

Low ceiling in the shop... ;) You know how I roll - I make it work with what I have!! :-X04 At least I'm not on the side of the road - remember Alex :-huh in AK??

I'm having a BLAST so far. As rusty as this thing is, everything has been easy so far. Toooo easy. :-X16 This place is beautiful - even though it is unseasonably WARM - I'm enjoying time with friends and getting to give Frank his truck the kind of love it can't get at the 'mechanic'. He will be PROUD of this thing when he sees it next!! :-jammin

Feeling that twitch come back...
Even tho i just buttoned up TXtinct... wanna yank another one...

Just so dang hot down here in South Republic.

Reps Jason. You guys are so quick at this, need to put some injectors, springs and turbo on this before you return it. You can tell him it was the oil pan that slowed it down.

Subscribing to this too

Is that the front or the back of the IC? Any idea what perforated it? Seems like a well protected location.

What was wrong with the oil pan?

Ryan

After we cleaned it up - there is nothing obvious... Maybe a trans cooler line leak? I was suspicious because the boost was LOW during test drive before engine extraction. Boots were all tight and turbo looks fine. :-huh

Well, for some reason everything up here RUSTS AWAY eventually. :-X15 The oil pans take a beating because they get sandblasted with road salt and gravel, coated in mud and then heated/cooled on a regular basis. Once the thin factory powder coat is compromised - the end has begun.

The new pan has truck bedliner coating on it and I bet the owner becomes more attentive to keeping it clean and touching up the paint as needed. ;)

Lemme know if ya find a pill for that twitch!! :p This is still a LOT of work... :-X16

And wouldn't ya freakin' know it is HOT and HUMID up here right now!!!! It's much cooler at my house. I'm drinking a gallon of water a day and still melting. :o Not at all what I expected!

Lol. Yes, my standard recommendation anymore is at least 238/100's, T4/S468 and the 'supporting mods'. :-X04 But Frank would never even know it was there. This is not a hot rod or a heavy hauler - just transportation for a 6'-7" tall guy. He loves his truck, because it FITS. And because it runs on WVO! :-X04

I don't mind fixing one up 'stock'. There is something to be said for how smooth and quiet a stock truck is. Its always nice to hear something run RIGHT. It also helps if it LOOKS GOOD!! :-jammin Dunno if it'll run right yet - but it WILL look good! :-X22

Engine got p-washed today to remove rust scale and finish degreasing it, then hauled back into the shop and placed on the engine stand. The truck was drug out and the engine bay descaled and degreased as well.

Up-pipe to manifold bolts were rusted to paper-thin and were NEVER coming out, so we decided to remove the exhaust manifolds. ONE bolt came out with a wrench... The rest came out with help from our friends oxygen and acetylene. ;) The bolts all came out of heads pretty easily, but a couple required some thermal persuasion from the MAP gas torch. We decided we'd at least try to extract the bolts from the manifolds. I'll be damned if we didn't get them all out!!! Unbelievable - seriously....

I am more of a believer in Kroil than ever!! Every bolt I thought I might be removing got hosed down the minute I saw the truck, and I sprayed them all again a few times for good measure. Its miracle stuff. ;)

The new oil pan got bedliner applied and I really wanted to install it today, but we are still waiting for sealant, dipstick thingy, etc. We did get new SS fuel lines and some other goodies from www.veggiegarage.com and a box from Riffraff. :-jammin

Tomorrow we'll rebuild the turbo and pedestal, paint the engine, paint the engine bay, (source a new CAC?), install new GP's and hopefully get the parts to rebuild oil cooler and re-install the oil pan... :-X18