Ford Truck Enthusiasts Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   1948 - 1956 F1, F100 & Larger F-Series Trucks (https://www.ford-trucks.com/forums/forum41/)
-   -   1956 Ford with LS3 Motor option (https://www.ford-trucks.com/forums/1259772-1956-ford-with-ls3-motor-option.html)

AXracer 08-07-2013 04:53 PM
Bob, could you PM me the contact info? I'd like to keep it on file.

DW SD 08-07-2013 05:32 PM
Originally Posted by AXracer (Post 13413591)
Bob, could you PM me the contact info? I'd like to keep it on file.
Bob,
I left you an email through the board hoping for contact info, too.

This is timely. I just put a deposit on an LQ9 (6.0L) and auto trans from the escalade / yukon.

Thank you,

Doug

BOB FERGUSON 08-07-2013 05:42 PM
WIRING HARNESS LS
 
Originally Posted by AXracer (Post 13413591)
Bob, could you PM me the contact info? I'd like to keep it on file.
LS HARNESS SOLUTIONS

Standalone Engine Harness Modifications

KEN WOLKENS
kwolkens@gmail.com

BOB FERGUSON 08-07-2013 05:44 PM
Originally Posted by AXracer (Post 13413591)
Bob, could you PM me the contact info? I'd like to keep it on file.
POSTED LS INFO.

Hope it helps us all !!!!!!!!!!!!!!!!!!!!!!!!!

DW SD 08-07-2013 05:54 PM
Bob,
Thanks! Dropped Ken an email.
I wonder if he'll program the computers, too?

Doug

BOB FERGUSON 08-07-2013 06:02 PM
Originally Posted by DW SD (Post 13413719)
Bob,
Thanks! Dropped Ken an email.
I wonder if he'll program the computers, too?

Doug
He has a contact in Michigan that cleans out the computer .

In my opinion, have him flash the computer then get a tuner when you Dyno it or he will fly to assist you I believe?

His e-mail address:

ryan.vanvels@gmail.com

DW SD 08-08-2013 06:44 PM
In talking to Ken, he says he does do the PCM (engine and transmission computer) programming, including for more power. A complex tune (turbo or super charging, for example, he'd leave to a specialized tuner, likely with a dyno).

Ken is a wealth of knowledge and someone I will definitely work to do my harness mod as well as engine programming.
Really appreciate the information Bob!
Big thumbs up for Ken and his service.

Doug

ZFLASH 08-08-2013 07:32 PM
Just my 2 cents on this tuning deal, look up Chuck C.O.W., stands for Corvettes of Winchester. He has a great reputation of the Corvette Forum, he travels all over the country because there is a great demand for his tunes. Plus they too have a great mail in tune,plus ones done over the internet. Good luck, L8R ZFLASH

BOB FERGUSON 08-08-2013 09:07 PM
Originally Posted by DW SD (Post 13417750)
In talking to Ken, he says he does do the PCM (engine and transmission computer) programming, including for more power. A complex tune (turbo or super charging, for example, he'd leave to a specialized tuner, likely with a dyno).

Ken is a wealth of knowledge and someone I will definitely work to do my harness mod as well as engine programming.
Really appreciate the information Bob!
Big thumbs up for Ken and his service.

Doug
We all need help and Ken is one of those finds that is a Hot Rodder with a wealth of knowledge to assist us all at affordable rates. More importantly he truly cares and is involved in your build.

Movin' forward,


All times are GMT -5. The time now is 07:28 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands