79 250 and 79 supercab 250 both 4X4 aprting out or sellin whole.
 

parting out or selling whole a 79 f250 and 79 f250 supercab both 4x4s... both are 4spd 205 trucks.. one with rebuilt trans/tcase. both are dana 44 front and dana 60 rear..the supercab has a decent body but the reg cab is kinda rough specificly the bed...neither has a motor but the supercab could be made a runner.driver for a few dollars more and the 460-4bbl I have..

Interested in the 4 speed. Any pics and price?

which one do you want? do you want anything with it like the transfer case, bell crank, clutch rod please more specific than can give a price :D

Hi, Do you have the 4 pieces of the tailgate hinges? And a passenger side door window regulator? And any pics? And some prices. Thanks Tony

ya have them all what pieces do you need for the tailgate?

I found the tailgate parts at the scrap yard today. But I still need the regulator. What you asking for it?

If the bed is junk, I'd be interested in buying the fuel door area to convert mine to a dual tank truck. Need the fuel door, the plastic, and the small section of the bed.

Id be interested in the steering boxes off of both. Let me know what you want for them.

I'd be interested in the frame cross member - the one the emergency brake cables mount on to. Also I'd be interested in a steering shaft with the u joints. How much for each?

If the bed is junk, I'd be interested in buying the fuel door area to convert mine to a dual tank truck. Need the fuel door, the plastic, and the small section of the bed.
Do you have these parts?

sorry fellas been on the road ALOT.. if you still need parts hit me with fresh requests and i''l see what i have..

Oh man I am moving to Corvallis in January, I would love to have the supercab 4x4 to drop my 6.9 in. I just absolutely love that body style. If it doesn't sell by then I will definitely have to come by and drag it back with me!

I'd be interested in rebuilt tranny/transfer case. Also need a header panel for bed. And a patch panel out of the beat up box, the piece below the spare tire mount(drivers side front area). Good blue interior on either one?

If the 79 f250 reg cab is dual tank and IF it has the plastic front tank......I'll tank the tank and ALL related mounting parts including filler hoses....don't need the fuel door etc.

Thanks ill pay shipping and ccan pay right away

the supercab is almost running and reconstructed.. now has 351m/400 w2bbl carb in it along wtih the rebuilt 4spd and transfer case along with a 3" lift with 16" wheels and proxois at radials..as for the regulercab it went to the great salvage yard in the sky..still have some missilaniuos parts lying around like an extra 205 and a near mint tailgate..

Looking for power steering gear and pitman arm if still available

Need a steering wheel.If you have one how much shipped to michigan?

are you after factory or after market and cruise or no

Looking for tailgate in good shape

Looking for factory but was told that you can only use a 73-77 wheel for the signal cancel to work.Not sure now if an newer than 77 will work on mine.

i have a really nice black tailgate i am selling. one spot i the spot weld seperate will weld up before send if like i want 80 bucks since no dents

Do you have a hitch? PM me

I need a headlight, wiper bezels for a 73-79 f250 and i also need the black gauge cover w/o air with all the screw holes not broke out. if you have these let me know please.

Tim

throttle cable bracket that bolts to firewall? how much shipped to kalispell, mt 59901? can pay via paypal.

i dont have a black gauge cover, there is no such thing as wiper bezels and you can get a headlight at any autopart stores for cheaper than shipping but what one do you have circle or square

what motor do you have for a throttle cable bracket

the bracket I'm looking for looks like this one from f250restorer's swap thread.

http://i659.photobucket.com/albums/u...e/P1010201.jpg

i need the headlight switch/wiper switch bezel. its the chrome peice that mounts to the dash around the switchs. they are both engraved with lights and wipers.

thanks

How much for transfer case?
I could use a tailgate too, how much on that as well?

Can I get a pic of tailgate?

I probably will buy tailgate, if you could price to western NC

due to its large size shipping is 169.00 through UPS with a low declared value sorry and 75 for tailgate includes pivot pins and hinges i believe

The Things I NEED: 1) A Box, 2) Power Steering Gearbox, 3) A Complete wiring harness w/ the Dual tank set up and switch. 4) Doors both of them, and Hood, ect. I need this stuff!!!
:-jammin
I am disabled wanting to finish my Truck and I am looking for Sponsorship of any kind.

would you happen to have a functioning steering shat ? ( the shaft between column and steering gear. ) if so how much are you asking? thanks.

Not me, I need a gear box from a 74 4x4 to convert to Power steering

hyperactive 460 it depends give me some stats of your truck

arkangel is your truck a 150 250 350 etc...

A 1973 F250 4x4 converting to power steering and electronic ignition. Need a wiring harness that's set up for the Brain box. A complete harness would be nice but min. under the dash at the fire wall. Harness.

Todays
 

I need a COMPLETE WIRING harness for a 74 to 78 f250 with the Ignition Control Module. Something that's not spliced and diced. I am disabled looking for some help finishing my Ride. I am on a fixed income looking to get my truck fixed RIGHT, e-mail me. I can't get to the messages here. I don't know why. The harness has to have no splicing or hacked upon issues. It needs to be for a Dual Fuel Tank assembly. with the Primary at the Rear.

lorencook413@yahoo.com

sorry for the delay, life gets in the way sometimes. i have a 1978 F-250 4 x 4 3/4 ton.