any pictures yet ?

need a email address site not letting me post pics here..

I think u sent me a pic of a steering shaft not the axle. Do u have the drive side axle and can u send me a pic of it?
Thank you

yes and will try to send soon..

Hello,

Im looking for the front sway bar brackets that attach to the front of the radius arm / ibeam. Zip is 77040. Thank you

Hi im need a auto steering column and power steering gear box for a 77 F250 4x4 lowboy

is that transfer case divorced or married?

the only transfer case i have left is a married 205 off the tranny.. steering boxes are all gone and the only columns are stick floor shifts. and i havent had a set of sway bar brackets for the front axle in years..

Do you have the frame to engine mount perches for a 300 from one of the F250 4x4s?

nope actaully looking for a set myself

any chance of a set of good rocker sill plates off one of the supercabs?

You mean the tin plate where the door shuts.. have a couple sets of those..

looking for front dana 44, front differential, etc. converting my 66 f250 to 4wd. need a tranny too if you got one that would work. where in oregon are you? im in reno. Could pick up or can you quote me on shipping to 89509?

I have a smallblock t18 4x4

parts
 

i dont have the leaf spring 44 any more and the tranny went elsewhere.. that t18 setup would be a good start... easy to swap in and adapt to differnt setups... if i find anything i'll let you know i get to reno alot as a truck driver so i could just bring it with...