tcase output shaft play video
I made a video showing the play in the output shaft on my tcase. Can anyone tell if this looks normal before I go replacing that leaky seal? I was getting ready to do this video and shook that shaft once and and that drip at the seal dropped right in my dang eye just before I made this video...:-arrgh
I just don't want to go to the trouble of pulling output shaft to replace a seal only for it to go bad again because I have a bearing shot in the tcase. Never done any of this before and don't know what would looks acceptable. Any help would be appreciated! |
Go ahead and pull the drive shaft out and look at the splines on the t-case shaft, and inside the drive shaft, and see if they look worn.
|
All times are GMT -5. The time now is 09:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands