NEED HELP!!
 

hey there hoping u guys can help im trying to rig up an older fisher plow on my 94 f150 shorty but having some difficulty getting the pump mounted and running it has an inline 6 engine what ive done is take the serp pully off my seized smog pump and welded it to the front of the v pulley that came with the plow pump so i can just run it off of my serp belt rather than trying to make the v pulley work so got the belt for trucks with a/c but belt was quite a bit too long i mounted the pump under the power steering pump any suggestions??? thanx in advance

Welcome to fte. Sounds like your question is belt lengh. Take a piece of rope and run it around like the belt would go and back to itself. Then measure the lengh and go to your local parts store and tell them the lengh and they shud be able to get you a belt. Goodluck

thanx was going to try that but wasnt sure how accurate the rope would be but i will give it a shot tomorrow :-X22