Ford Truck Enthusiasts Forums - DESPERATELY NEED HOOD AND UNI DOORS

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)

- 1961 - 1963 F100 Unibody (https://www.ford-trucks.com/forums/forum267/)

- - DESPERATELY NEED HOOD AND UNI DOORS (https://www.ford-trucks.com/forums/1203991-desperately-need-hood-and-uni-doors.html)

carls-ford

11-18-2012 07:28 PM

DESPERATELY NEED HOOD AND UNI DOORS

PROJECT STALLED IN BODY SHOP,,, NEED 61-66 HOOD, AND 61-63 UNI DOORS, I HAVE ALOT OF FORD HI-PO FORD PARTS 1960-69 PLUS 1993-95 LIGHTNING PARTS TO TRADE OR WILL BUY THEM STRAIGHT OUT
ANYONE GOING TO COLUMBUS, OH. THANKSGIVING SWAP MEET THAT CAN DELIVER WILL PAY FUEL. CARL

jacks61ford

11-18-2012 08:22 PM

where u located???

carls-ford

11-19-2012 10:08 AM

Ohio 44609

NumberDummy

11-19-2012 10:45 AM

Quote:

Originally Posted by carls-ford (Post 12500045)

PROJECT STALLED IN BODY SHOP,,, NEED 61-66 HOOD, AND 61-63 UNI DOORS.

Hood is the same: 1961/66 F100/750 / Uni doors are the same 1961/63 F100/250.

The difference between Uni and non Uni 1961/66 F100/1100 doors is the scallop line. Straight on Uni's, doglegged on non Uni's.

truckrod

11-19-2012 03:44 PM

Carl, I have a pair of uni doors they are complete im in akron let me know if you want to come look.

carls-ford

11-19-2012 05:35 PM

absolutely send me a phone number, carl

truckrod

11-19-2012 05:44 PM

e mail sent

jxnslotcar

11-24-2012 10:09 AM

I also have a 1962 Unobody parts truck that has a hood and both doors if the others do not pan out. I will be pulling the body off of the frame at some point as I have another use in mind for the frame and drivetrain. I will be putting a 1950 Ford F1 cab on the Unibody frame. Let me know Jim

jxnslotcar

11-24-2012 10:49 AM

BTW,I am in Jackson,Michigan 49202. southern part of the state in the middle,about 40 miles from Mount Pelier Ohio

carls-ford

11-27-2012 04:24 PM

can send me a phone number

All times are GMT -5. The time now is 06:26 AM.