Blue Oval Dismantlers - New Vendor for 61 to 66 Trucks Specializing in part outs
Hey Guys I have been working on this the past few months to turn what I was doing in my spare time into more of a full time business. This is a second business so it is intended to support itself I am not doing this to make money so prices will always be low. We only do Pre 97 parts for full size Trucks and Broncos.
It seems they merged my FTE account so this is the only one I have now (Formerly Socal73) Anyway we are in the process of getting rolling but feel free to contact me for anything you might need we can ship anywhere at UPS's lowest rates and we are located on Southern California and source all of our vehicles from the southwest so that means no rust (ATTENTION RUST BELT GUYS!) I have late pick up from UPS so I can usually ship the same day before 4pm Pacific. Larger items I can ship freight (it's cheaper than you think) or are available for local pick up and or delivery in the Southern California Area. Lastly if you are in the southwest and have an old full size truck or bronco let me know, we pay cash and we will come and get it. :-drink Cheers Mason Perry I will start a thread in classifieds that will be updated daily. I will post here when that thread is up and running.:-X22 <!-- / message --> <!-- / message --> |
Mods need to delete this thread.
Or restore "elpolako" Garbz |
Originally Posted by garbz2
(Post 12100347)
Mods need to delete this thread.
Or restore "elpolako" Garbz |
Sore subject.
No selling in the threads. Use the classified only. Its the rules......... |
garbz is kinda a ****head u must excuse him as there is no excuse for him
|
Originally Posted by jacks61ford
(Post 12100392)
garbz is kinda a ****head u must excuse him as there is no excuse for him
|
Originally Posted by jacks61ford
(Post 12100392)
garbz is kinda a ****head u must excuse him as there is no excuse for him
Garbz |
Originally Posted by garbz2
(Post 12100421)
Last time i decode a vin for you! HA....LOL
Garbz |
Originally Posted by jacks61ford
(Post 12100392)
garbz is kinda a ****head u must excuse him as there is no excuse for him
to the OP... i looked at your website, LARGE parts that cost more to ship than the part is worth will not be a easy sell here. You would do better with the Local people off craigslist. But, Good luck to you anyways. |
Originally Posted by Bill W
(Post 12103268)
That's Mr. ****Head to you bud;)
. |
Ok Guys I just pulled this off yesterday, it is absolutely immaculate, no bends, no dings, no scratches, the pictures don't do it justice. It is aluminum off a 64 I believe, it comes with headlight buckets, springs, hardware for them, I also have the turn signals that go above the grill as well as the stock lights for them, these are also immaculate, and the entire wiring harness for both headlights and turnlights and horn, with relay from grill to firewall plug, none of it is cut so it's plug and play.
Here is a teaser picture, I have more up if you follow the link below. http://i1186.photobucket.com/albums/...801_131456.jpg I have them in the classifieds section here: https://www.ford-trucks.com/forums/1...ted-daily.html Send me a PM or email if interested, I will post them on the website either tonight or tomorrow, this can be shipped via UPS as well. Cheers Mason |
Grille is a 65. if you find a 63 steel grille id be interested
|
Originally Posted by BlueOvalDismantlers
(Post 12130198)
Ok Guys I just pulled this off yesterday, it is absolutely immaculate, no bends, no dings, no scratches, the pictures don't do it justice. It is aluminum off a 64 I believe, it comes with headlight buckets, springs, hardware for them, I also have the turn signals that go above the grill as well as the stock lights for them, these are also immaculate, and the entire wiring harness for both headlights and turnlights and horn, with relay from grill to firewall plug, none of it is cut so it's plug and play.
Here is a teaser picture, I have more up if you follow the link below. http://i1186.photobucket.com/albums/...801_131456.jpg I have them in the classifieds section here: https://www.ford-trucks.com/forums/1...ted-daily.html Send me a PM or email if interested, I will post them on the website either tonight or tomorrow, this can be shipped via UPS as well. Cheers Mason |
Originally Posted by BlueOvalDismantlers
(Post 12130198)
Ok Guys I just pulled this off yesterday, it is absolutely immaculate, no bends, no dings, no scratches, the pictures don't do it justice.
It is anodized aluminum off a 1965 Custom Cab / It comes with headlight buckets, springs, hardware for them. I also have the turn signals that go above the grill as well as the lights for them, these are also immaculate. The entire wiring harness for both headlights and turnlights and horn, with relay from grill to firewall plug. None of it is cut so it's plug and play. http://i1186.photobucket.com/albums/...801_131456.jpg The upper grille panel with parking lamps and chrome Ford letters is the same 1965 & 1966 Standard & Custom Cabs. The headlamp doors are chrome, specific to 1961/66 Custom Cabs. The buckets and etc related parts are the same for all 1961/66's. The wiring harness is the same for 1965/66 Standard & Custom Cabs. 1966 grilles: Painted-Standard Cabs & Anodized Aluminum-Custom Cabs are 1966 only. If you are selling parts, you have to know what their applications are, or you'll have unhappy buyers. |
Yeah, I'm a little concerned that this 'vendor' hasn't even mastered the very simple grille ID/model year thing. 2 minutes online and you'll find the illustrated chart that shows the differences.
Price isn't bad, though. |
All times are GMT -5. The time now is 02:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands