Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   Ford Truck Parts for Sale (https://www.ford-trucks.com/forums/forum235/)
-   -   73-79 Ford Truck & 78-79 Bronco Parts-NEED SOMETHING?LOOK HERE! (https://www.ford-trucks.com/forums/1159171-73-79-ford-truck-and-78-79-bronco-parts-need-something-look-here.html)

MaxxHavoc 05-29-2014 06:39 AM

I think were all just wasting our breath here. No replies or private messages from the OP. I would call this thread dead.

banksvil1 05-29-2014 04:21 PM

looking for an engine
 
looking for a 360 or 390 engine call me if you have one 702 580 6626

hayj 05-30-2014 11:20 AM

pop out quarter windows.
 
Looking for a set for a supercab. 74-79. Also is your front Dana 60 still available.

Dave145 05-30-2014 11:30 AM

Eventually folks will figure out this thread is probably dead....

jjdrichter 06-23-2014 03:20 PM

Looking for Brackets for '77 F100 flareside. I think #'s are D7TZ-17787-A and D7TZ-17788-A. Do you have?

Carver Speed 06-27-2014 08:57 PM

Yup, dead like a door nail!

kduke 07-01-2014 12:27 PM

ack, checking last posts before asking might be a good thing...

79fordf3504x4 07-01-2014 11:13 PM

Hello, how much are you asking for your hp dana 60 ?

BaltoMoJoe 07-20-2014 09:13 PM

1979 F150 Parts
 
1979 F150 Ranger Lariat 2WD 351M

zip 21157

I could use inside door panels-green
a green steering wheel ( I've seen them in pictures-would love to have one)
Valve Covers
Grille
Grille Trim

also could use a
fan shroud
outside door mirrors

also, it appears there is a type of bushing or something similar in the tailgate where the hinge goes, but I'm missing it on one side, if you have a tailgate, can you look and see if there is some kind of bushing in it, I can't find anything online, and the junkyards never have any tailgates

hermancm 07-23-2014 06:50 PM

How about a exhaust manifold plenum heater valve for my F150 300\6 of 78 vintage? And tan door panels too, maybe... the PO made wooden ones that do the job but, you know. I get a lot of grief bout em! And you wouldn't have the top bracket to hold on to the heat shroud for the intake heat pipe? That'd be awesome if you do! 54896

fordtruckguy78 09-25-2015 06:05 PM

whats a 79 f150 2wd rolling chassis worth these days ??

Carver Speed 09-25-2015 07:35 PM


Originally Posted by fordtruckguy78 (Post 15671337)
whats a 79 f150 2wd rolling chassis worth these days ??

Not much unless it's a short bed, a 4x4 or both.
Jeff

fordtruckguy78 09-26-2015 12:26 AM

anyone in canada ontario have a rolling chassis kicking . let me know plz ty

BEN WHEELAN 12-04-2015 10:42 PM

need a 360 rear sump oil pan and pickup. also a price on 351/400 bellhousing and frame motor mounts. shipping to 87507. Thanks!

bajafishnut 12-06-2015 01:00 PM

Some of the stuff being looked for, can be hard to locate. Patience Grasshopper, and you will someday snatch the pebble from the Great Hand of Parts.
For instance, I just finished installing an A/C unit, (Fridgeking under dash unit), after searching for 3 years. It was on Evilbay for about 2 hours. As luck would have it, a 2nd one just fell into my lap, after I bought the first. When it rains, it pours.. Good luck in your searches... Need any 300 IL 6 parts?

Baja


All times are GMT -5. The time now is 04:58 PM.


© 2024 MH Sub I, LLC dba Internet Brands