NH, It's and auto. Do I have to have the rears machined out? I read that somewhere.

Rears of what?

Looking for Drivers side turn signal housing for a 2003 F350/ F250 I think they are the same.

https://cimg1.ibsrv.net/gimg/www.for...b7a8dc36c5.jpg
Looking for the driver's side window/door switch bezel for my 05 250...I think the style is the same 05-07, medium pebble. Where the window, window lock, door locks, and mirror controls are on the same bezel. This is the surround for the window switches, window lock, door lock, and mirror knob.

Darn, the truck I'm repairing did have one turn signal, but it got wrecked on the driver's side; it's the passenger side that I have. I used the two good ones off this part truck to fix the wrecked truck. Sorry.

Thanks for checking.

On my 03 the window and locks are on the same bezel but the mirror is separate, it sits in front of the other switches. So make sure it's correct before you get one.

I think you're right. I'll go check in a bit.

Need a 7.3 compressor wheel
 

I'm in need of a compressor wheel for my 2001 7.3's turbo. Stock replacement is fine.

tow mirror housing on door
 

Looking for the mirror housing that mounts on the door on the passenger side.

I figured someone would this since usually the mirror housing itself gets smashed and break but the housing on the door where the 2 arms TO the mirror is still in one piece.

Anyone have one ? 2001 f250, passenger side.

Sent you a pm on this.

Received, replied by email.

Hi , I have a set of 5 leaf springs for a ford f250 super duty. I think they are brand new and they are free to anyone that could use them. Location is Lynn,IN

I have a few things i am looking for:

2001 Super Duty Short bed
2001 Crew Cab drivers side rear door
Stock Super Duty Rims
Non-Blinker Tow Mirrors, Manual or motorized adjust.

--I know this is a free parts area, but would pay if the price is right. Just seeing if anyone has anything they are getting rid of.

I have most of a short bed - used the skin off the driver's side to repair mine. And I think the driver's door is OK. But, this is a burnout - good for the metal only. It's in Houston.

https://cimg6.ibsrv.net/gimg/www.for...8e93759639.jpghttps://cimg7.ibsrv.net/gimg/www.for...b31f7cc5f2.jpghttps://cimg9.ibsrv.net/gimg/www.for...c147e22f6d.jpghttps://cimg0.ibsrv.net/gimg/www.for...abd7c675e7.jpg

OR, if anyone else sees something they need off this. I will be back in Houston around 9-1 and will be getting rid of this asap.