KD 2044 Tapered reamer
 

Hello, Does anybody have KD tool KDT 2044? It's a tapered reamer that is used to ream track bar hole on front axle dana44 from F150 year 1976-77? They don't make that tool anymore and it is difficult to find it. Please let me know if you have one in decent shape or know of someone who is willing to sell it. milan65milan@gmail.com

'Found a seller:

KD Tools Tapered Reamer 7/16 to 1 with a 3-5/8 Blade Length - 210536 - discount tools, tools, dewalt, automotive tools, air tools, Discount Power Tools, woodworking tools, power tools, cordless tools, pneumatic, hydraulic, northern tool,cheap, discou

http://www.tonsoftools.com/images/KDT2044.jpg

Hi, I already tried this website, but I cannot pass the payment method screen to finish the transaction, and there's no phone number to call them or chat or e-mail. Thank you anyway. Milan

How many degrees is that KD-2044? I mean, Ford tie rods holes are 7 degrees and there are plenty of them tools on the market.

Hi, the tool supposed to be 10 degrees. It just makes me wonder how others are dealing with this issue as it is very common with DANA 44 1976-77 and the tool is nowhere to find. Milan

How about a tool from one of my favorite vendors?: Speedway Motors !

Speedway Tapered Ball Joint Reamer, 10 Degree - Speedway Motors, America's Oldest Speed Shop

,,, starts at 1/2-inch though.. not 7/16 like the KD-2044.