Hello from Salem
 

Hi everyone, Stoping in to say to my neighbors in Oregon, I Live here in NE Salem and I own a 75 f250 as my daily driver, I also own a 51 f-1 but its a bit of a frankenstien. (Darkside)

Ron

Hello Scrapheap, I'm getting ready to build a 52 panel myself.

Hey mike, looks like you have a couple nice projects going. I have a long way to go on my panel yet, but I will get there someday. The weather is starting to look better so I got the garage cleaned up and I am looking into gearing up to work on it this spring. What your plan for your panel? I see that the Jag suspension your planning to add, pretty cool. So just wondering it it hard to find front end body parts out there in your neck of the woods?
Ron

Welcome! If ya click on the "Join Chapter" link at the top of the forum, I'll approve your chapter membership!

We have a great group of guys here!

Be sure and check out our daily BS thread here: https://www.ford-trucks.com/forums/1...s-flow-35.html

Once again, welcome to the Oregon Chapter!
Don.

Hello back at you from Seaside.

Hello from SW Polk county. I live West of Monmouth / Southwest from Dallas. I work out in Salem so I'm close to you every day.

Howdy from Corvallis!

Howdy from Sheridan.

The pannel will be a mild custom, I was going to use a 472 Cady for power and put one togeather with a 400 TH. but when I set it in the frame it didn't look right so I set it aside for some other project and dug out a 300 CI. I 6 with a c6 that I'll build like the one in my roadster only with a little higher compression. I'm thinking of using the interior and rear floor from an Aerostar in it.
Most of the parts around here are beat to rat crap from years out in the woods so I get a lot of stuff from E-B#y and the HAMB guys in the morth west. Fenders are a premium item on the 51-52s but I have a line on a F1 pick up down in Portland, The guy wants a grand for it right now so I'll wait and see. I could use a right front, mine has been prettywell stuffed with some bad bondo work, it's repairable but would be a lot of work.

Here's a link to my 53 panel project: https://www.ford-trucks.com/forums/9...r-project.html

MAYBE I'll get a chance to shorten the frame this summer, and get it back on track. We'll see.........lol

Speaking of 472 Caddys............... Here is a pic of my 68 "6 Door" project:
http://i51.photobucket.com/albums/f3...rpickup002.jpg


It not only has a 472 in it, but it's FRONT WHEEL DRIVE!

I used a 472 ci out of an Eldorado...................:D

Howdy, from The Peoples Republic Of Eugene!

Yikes! Good thing you got wheat fields to turn around in Don.

Hello from Shedd/Brownsville!

Looks like we all got projects! Imagine that! :D

Don, that things crazy.

You ain't seen nothing yet! There's a reason the frame is cut off just behind the cab. I'm going to "breed" my tandem axle drag-boat trailer to the back of the frame. The "Thing" will be 33 FEET long..............

Using the Caddy front wheel drive let's me have torsion bar suspension, which has a Hyd ram to adjust the front ride height, and the rear tandem will be hinged on the front with Hyd rams to adjust the rear...........




Thank you! :-jammin

I love doing strange things...........................lol