broken lower coil spring bolt- HELP
Looking for tips or ideas on how to get the lower spring retainer bolt
out of the stinking axle. it broke with about 4 threads left to go. Ive got the jamb nut removed and soaked it in PB Blaster for 2 days now and still nothing. Last night tried to get it to move with a 4ft cheater bar and now I have to go to Sears for a new ratchet. Any hints tips or suggestions would be greatly appreciated. |
Bump,
No one has experieced this before or has any helpful tips? |
when all else fails use heat. Do u have access to a decent torch? Not a dinky propane one but an oxy/acet that will get it red!
|
Got heat, but didnt know if it was cool to heat the axle since
its cast. Anywho thats the only conclusion I could reach as well so after the holiday a-torchin' I will go. |
Originally Posted by Capriguy
(Post 11156992)
Looking for tips or ideas on how to get the lower spring retainer bolt
out of the stinking axle. it broke with about 4 threads left to go. Ive got the jamb nut removed and soaked it in PB Blaster for 2 days now and still nothing. Last night tried to get it to move with a 4ft cheater bar and now I have to go to Sears for a new ratchet. Any hints tips or suggestions would be greatly appreciated. |
All times are GMT -5. The time now is 10:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands