Is this a lower cab corner?
 

Hey guys..

Quick question...

I have a picture for you to look at... The picture (If you standing behind the truck) Of the right bed cut out.

If you notice there is a alot of rust under the bed in that corner, The part rusted out is that the cab corner?

I don't want to order one and it not be a cab corner.
I did notice if you look up in that area you see the hose going to the fuel tank.


Thanks in advance!

http://i64.photobucket.com/albums/h1...116_125447.jpg

Unis have no lower cab corners.

It is all boxed in along with the torque box. Yours appears to be missing due to cancer.

Page 14-15 Figure 5 in the 61 factory shop manual has a pretty good representation of what is supposed to be there.

Purchase a manual or a body assembly book as a guide. You need to replace all the reinforcement that is missing.

Here is a shot of the rear of the cab on a 63
http://i368.photobucket.com/albums/o...6/PB290164.jpg
Here is a shot of the bottom of a long bed torque box
http://i368.photobucket.com/albums/o...6/PB290162.jpg
Here is the additional reinforcement between the bedside and the Torque box stamping
http://i368.photobucket.com/albums/o...6/PB290163.jpg



Garbz