99-04 rear seat cup holders
im wondering if in CC's that middle flip down in the middle of the back seat do they make those with cup holders in them?
|
Originally Posted by VONxRUBENxLA
(Post 10930371)
im wondering if in CC's that middle flip down in the middle of the back seat do they make those with cup holders in them?
|
My rear seat has 2 cup holders in the arm rest that pulls out of the seat. (center of rear bench) I can take a picture if needed but it is all stock that I know of.
2003 F250 7.3L XLT |
Originally Posted by HideoutJP
(Post 10931216)
My rear seat has 2 cup holders in the arm rest that pulls out of the seat. (center of rear bench) I can take a picture if needed but it is all stock that I know of.
2003 F250 7.3L XLT I believe we are talking about the samething ill post a pic in about a hour and half of what i think we are talking about. |
This is what I'm talking about!!
*http://tapatalk.com/mu/a6cd8a8d-b068-7034.jpg http://tapatalk.com/mu/a6cd8a8d-b07c-66b3.jpg |
Yup, thats it. I have the black interior and when you fold that down there are 2 cup holders in that arm rest. I will go ahead and work on getting the photo up hopefully tonight.
|
I think mine have cup holders. But I'm not sure. I'm not in the back seat often.. :)
|
Nice I gotta find one for my rig for the kids.
|
I have a 2006 king ranch and it has built in cupholders in the rear armrest. My arm rest is alot different and looks bigger then the pictures you posted.
Edit: oh sorry I missread the posts, looks like you already found out that they do make them |
Here's the one from my 2004...
Don't forget there's also a convenient place to write a note :-X22 http://www.frontiernet.net/%7Ejray77...0_rearseat.JPG |
It looks to be a different seat back on those two pics in the thread above. The first one looks almost square when folded up (like my '02 XLT); the second one is not shown folded up, but it looks much more rectangular.
I don't think the one with cupholders would fold up into the opening of the one without. |
I got my picture but it's on my phone so I'll have to wait still till tomorrow at my work pc to upload it! It matches the first picture.
|
|
Originally Posted by rickbrad
(Post 10940883)
It looks to be a different seat back on those two pics in the thread above. The first one looks almost square when folded up (like my '02 XLT); the second one is not shown folded up, but it looks much more rectangular.
I don't think the one with cupholders would fold up into the opening of the one without. |
Originally Posted by HideoutJP
(Post 10941988)
I have the same problem as the OP - kids with cups from McDonalds, etc. I would really like to have rear seat cupholders, and the information about the one that clips onto the front of the seat being a bit inadequate is good. I was going to go to the dealer and get one, but if it is really only a cupholder and a half... I remember back in '99 -'01 when the dealers still sent trucks to conversion houses to get leather. Then the automakers got smart and realized they could get that extra $5K! |
All times are GMT -5. The time now is 12:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands