|
Originally Posted by Yama4fitty
(Post 17134619)
I personally like the billet look...
The rubber angles were from Rigid I got off Amazon. They didn't fit too perfectly around the edges or the angle against the non-flat bumper so I used a dremmel tool with a drum sander to form fit them. The bumpers and grille housing are LineX'd and the billet insert is just rattle canned for a better visual appeal. The air dam was PlastiDipped. |
Originally Posted by Yama4fitty
(Post 17134319)
Before...
https://cimg9.ibsrv.net/gimg/www.for...312d412f9f.jpg After... https://cimg0.ibsrv.net/gimg/www.for...dc9ee1155c.jpg https://cimg1.ibsrv.net/gimg/www.for...cfa810a109.jpg I think I'm going to look for some black hardware to replace the SS to see how that looks. ... |
|
Originally Posted by ufvj217
(Post 17151449)
side angle: https://www.amazon.com/Rigid-Industr...id+flush+mount
up/down angle: https://www.amazon.com/Rigid-Industr...id+flush+mount |
Originally Posted by Sandman04
(Post 17151530)
Man thanks!! I looked but couldn't figure out what to search
|
https://cimg2.ibsrv.net/gimg/www.for...fac9b610d8.jpgProject Colossus.
|
Washed the 97 and the 12 Saturday and the 6.2 also got Mobil 1 synthetic and a motorcraft filter change!
https://cimg0.ibsrv.net/gimg/www.for...7168bc71f7.jpg https://cimg1.ibsrv.net/gimg/www.for...83cdf36d36.jpg |
|
Originally Posted by Sdowdle541
(Post 17156106)
Washed the 97 and the 12 Saturday and the 6.2 also got Mobil 1 synthetic and a motorcraft filter change!
https://cimg0.ibsrv.net/gimg/www.for...7168bc71f7.jpg https://cimg1.ibsrv.net/gimg/www.for...83cdf36d36.jpg Are the '17 wheels the same offset? I want to get the same wheels for my '12 since i'm not a fan of flashy aftermarket wheels |
Originally Posted by YouDon'tKnowMe
(Post 17156381)
Are the '17 wheels the same offset? I want to get the same wheels for my '12 since i'm not a fan of flashy aftermarket wheels
i think so. I didn't use any spacers or anything. Bolted right up and don't rub or anything. |
Originally Posted by Sdowdle541
(Post 17156471)
i think so. I didn't use any spacers or anything. Bolted right up and don't rub or anything.
|
A picture my boy took when he was driving it the other day:
https://cimg7.ibsrv.net/gimg/www.for...90c8e3a78.jpeg |
Added some lights to make it look like it's on fire
https://cimg0.ibsrv.net/gimg/www.for...507b8a5d4a.jpg |
That looks really cool. I think you need to find a way to make that Ford Emblem glow now!
|
| All times are GMT -5. The time now is 05:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands
