70s vintage F-600 parts..everything must go
 

I have numerous F 600 parts for sale... you name it I probably have it.. All from California rust free trucks

Complete truck (1979 F 600) also available

Getting out of the game.. I have years of parts that I have acquired... both two and four wheel drive.. Cabs.. all with current California pink slips..
Transmissions.. frames.. wheels.. some restored.. some not

Redding California.. email me with your needs
notmeofficer@gmail.com

I have a 79 f600 4x4, I am looking for a chrome grille, and clean front fenders and core support. do you have any, and what do you think shipping would be, that might be the killer as I'm in maryland, zip 21921. A pair of f600 doors would be great also with the big door handles.

I have all of those things.... the chrome grill.. rust free doors and fenders.. door handles etc etc etc....but unfortunately you are on the other side of the country and shipping would be a killer.. the grill is huge and the chances of it getting there unmolested would be impossible,,, sorry.. no sale

thats what I thought, thanks anyway

allmost forgot, I do need a good speedometer cable for a 4x4 f600, any luck there?
do you have any super single 20 inch wheels for the 6 lug f600 4x4?

I would prefer to sell the speedo cable with the cluster.. sorry..
I have hi dollar brand new stazworks rockwell 6 lug wheels with 95 percent 46 " Michelin XML radials... 5 of them for 3k... sorry.. you are just too far away

how much for the speedo cable with the cluster, would you ship that?

Speedo cluster with vacuum gauge.. all excellent..with speedo cable.. 300.00/20.00 to ship

Do you mind if I pick your brain about your super single setup? I have a '79 F600 4x4 I was wanting to run singles on- what were your considerations when spec'ing rims and tire size? Do you have any pictures? If you still have these wheels would you still be interested in selling them? I am in AZ so a lot closer than east coast!

Thanks- Richard

driver side lower fender extension?

Currently I only have a rust free cab for sale.. not wanting to part it

Cab hood grill support chrome grill

500.00

I also have a almost like new in cab fuel tank, stock ford

200.00

I am on the Eastern side, as well, so will not be interested, but some in the inline six forum would be interested in a HD exhaust manifold for the 300 engine, if you have one.

i need a fuel sending unit and gauges for our F-600 it is for the gas tank that is under mount not behind the seat. 832-804-7930

steve

no parts for sale currently...

may have some new trucks in the future

thanks

Richard...

I had John at Stazworks make them... offset and chamfered both sides so I could run them front or rear.. I think it ended up being 8.5 offset. but its been awhile.. I had military 46" xmls on them

I sold them.. but I intend on getting some new ones in 22.5 not as tall ... staz didnt want to do them because they wouldnt be dot.. I found a company that will do them.. I just bought some stock new wheels from them.. quality appears excellent. see my wheel post in the large truck section.. same company