1988 F350 4x4 Diesel
 

I am posting up my 88 F350. It is a 1 ton cab and chassis truck with a 12 foot flatbed on it. I just put new sides on it a couple weeks ago and drove it to Eugene, Oregon from Montana last Monday. I no longer need it so I am putting it up for sale. It has a 5 speed transmission, four wheel drive and an ATS turbo kit on it. It runs great but starts hard. I don't have to use ether to get it going, but sometimes it looses its prime. I know it needs an injector return line kit. I have put new injectors on it, as well as a new alternator and two new batteries. I changed the fluid in the transmission and transfer case when I got it, as well as changing the oil, oil filter, air filter and fuel filter. It also has new antifreeze in it with the SCA additive. It also needs brakes pretty badly. The rotors are warped and the master cylinder needs replaced. It is still drivable, but I wouldn't suggest driving it with a lot of weight on it. The power windows work, the power locks do not. They did. Once. Now they don't. Also, yesterday someone hit my mirror as they drove by and broke the mirror. I am going to see if I can find one to replace it with tomorrow. You can call me at 406-214-9310. Would like to see $1500 OBO.

http://i104.photobucket.com/albums/m...cture002-1.jpg
http://i104.photobucket.com/albums/m...Picture001.jpg
http://i104.photobucket.com/albums/m...cture003-1.jpg
http://i104.photobucket.com/albums/m...cture004-1.jpg

Bump for price reduction and pictures added.

price reduced again!

Hi,
Ok, bottom dollar for the truck?
How is the body as far as rust - are the floor boards or cab corners rusted out?
Thanks,
Eskimoman