Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   401, 477, & 534 SD Engines (https://www.ford-trucks.com/forums/forum137/)
-   -   ford 6.6L (https://www.ford-trucks.com/forums/1054992-ford-6-6l.html)

bigdually3 03-31-2011 11:14 PM

ford 6.6L
 
im in athens georgia and im looking to swap a 6.6L into my 84 f350. wheres the best place to look for an engine and trans setup for my truck?

also what transmission options do i have for the 6.6L. id like to keep it automatic.

also just to be stupid clear i am talking the ford 6.6 diesel inline six

Doug Burton 01-20-2013 11:01 AM

I have a Ford 6.6 inline 6 cy diesel i just bought this dump truck with this engine in it I need to bleed the fuel system where is the primer pump and what does it look like.And where could i get a service manual for this engine thanks

Doug Burton 01-20-2013 11:10 AM


Originally Posted by bigdually3 (Post 10166455)
im in athens georgia and im looking to swap a 6.6L into my 84 f350. wheres the best place to look for an engine and trans setup for my truck?

also what transmission options do i have for the 6.6L. id like to keep it automatic.

also just to be stupid clear i am talking the ford 6.6 diesel inline six

hi my mane is Doud i just bought a truck with this engine in it and dont know nothing about it i need to bleed the fuel line do you know were the fuel primmer is and what dors it look like thanks for your help ldbnab@gmail.com thanks Doug Burton

mrpotatohead 01-08-2017 10:32 AM

We had a fleet of 6.6's back in 89. The primer pump if I remember is on the right side of the block mounted on the transfer pump. It has an obvious knob on it that you unscrew to allow it to pop up. Ours had Allison AT 545 transmissions. These engines were solid with the only issue being the head gasket would leak coolant after a few years.


All times are GMT -5. The time now is 09:42 AM.


© 2024 MH Sub I, LLC dba Internet Brands