Dana 60 front axle(pics added)
 

I've decided I don't need this axle. It is complete from springs to hubs. Axle does not have lockouts and at this time is not pretty but all there. I tried to find code but was unsuccessful so I don't know ratio.
I'm in NW Indiana, PM me if interested.

http://i780.photobucket.com/albums/y...-27-24_800.jpg

http://i780.photobucket.com/albums/y...-27-37_321.jpg

http://i780.photobucket.com/albums/y...-28-21_288.jpg

http://i780.photobucket.com/albums/y...8-28-31_62.jpg

http://i780.photobucket.com/albums/y...-28-45_757.jpg

to bad your so far away from me

Where at in NW Indiana are you? Should be a tag on the front cover as well held on with 2 bolts.

I'm in Chesterton...1 hour east of Chicago. I'll look again but I did not see one.

Numbers are:

3 54 D81 A ZE
610023 1

Should be an open diff 3.54 ratio

Also did a little scraping and housing looks good. Top edge of cover is dinged a bit from removal. Small bit.

Pm sent.......

Suddenly a new truck with no axles has dropped into my life. I think I'm going to keep it now.