Need pics of 1985 Inline 6 4.9/300 under the hood
 

I just had my 1985 Inline 6 cylinder 4.9/300 rebuilt. It is manual transmission, stock, with a 1 barrel carb. The problem is that I connected all the hoses and wires back where I think they go, but it is just a bunch of spaghetti down there now. I am not 100% sure that everything is back where it needs to be, and would love to see some pics if you have one. So, if you have the same motor, post some pics under the hood, so I can have something to compare it to. BTW, it does run. Need to adjust the carburetor a little, which was just rebuilt also, but want to be sure. Thanks.

There was a post a couple weeks back from somebody who had bought a very original and low mileage 300-6. It had some detailed pictures of the feedback carb setup. It was like looking at one right off the lot. I cannot remember the heading on the thread but I think it was only 2-3 weeks ago.

My truck is an '85 F150, 4x2, 300-I6, manual tranny, EEC-IV, feedback carb, and it is mostly original
I have some pictures here;
My 1985 Ford F150 4x2 pictures by Grubbworm_photos - Photobucket
You will just have to scroll through them and see if any of them will help you. If not, just let me know exactly what you want a picture of, and I will try to oblige.

could you send me some pics of vacuum set up from carb
jake04570@yahoo.com

Larry, you know this post is 7 to 8 years old right?
Dave ----