1997 F-350 for parts. 5 speed trans case axles, cab and more.
I have a 1997 F-350 single cab, long bed I am parting out.
Most body panels are pretty rusty but the cab is in decent shape. 460 engine is gone. as well as the wiring harness too. Rear fuel tank is very rusty and no good. The front one is somewhat rusty but replaced a few years ago, appears good. Computer is gone too. ZF-5 speed is still there Trans case good. Front D-60 axle complete with steering linkages and recent balljoint replacement. 4.10 gears. All Good. F-350 front double cardon driveshaft with desirable T-Case Yolk Rear axle Sterling 10.5 , 4.10 gears Rear driveshaft Leaf springs for all 4 corners Plenty of interior parts available too. This was an XL so no carpet or power accessories. Grey interior. Bench seat in good shape. I will be posting pics as I remove this stuff. I just wanted to let you guys get first dibs at it before I post it on craigslist and other sites. This is gonna come apart and go away quick so get it now. PM works great for me especially during daytime hours. Weekends or after 3:30 M-F call cell: 865 740 0836 This is located in Johnson City, Tn. Large parts are pickup only, dellivery possible. Smaller parts can be shipped no problem. |
neal. i shot you a pm. get back to me please.
thanks mitch |
Originally Posted by 79f-250custom
(Post 9934739)
neal. i shot you a pm. get back to me please.
thanks mitch Thanks, Neal |
Sent you a PM neal.
Also do you have the front bumper? |
Originally Posted by snaponprofile
(Post 9935859)
Sent you a PM neal.
Also do you have the front bumper? Sorry I do not have the front bumper but I may be able to get you one pretty cheap. I have a buddy that is getting an aftermarket one today or tomorrow and his factory one is in good shape. |
Does it have the slots in the front or just normal all around?
|
Also, Is the D60 a 4x4?
|
Interested in ZF, PM me how much you are asking. Looking for any trades or just cash?
|
Originally Posted by snaponprofile
(Post 9937074)
Does it have the slots in the front or just normal all around?
Originally Posted by snaponprofile
(Post 9937085)
Also, Is the D60 a 4x4?
Originally Posted by RustyShackelford
(Post 9937796)
Interested in ZF, PM me how much you are asking. Looking for any trades or just cash?
Thanks Rusty. |
hey, do you have the vinyl pieace on the pass side of dash,and the black gauge panel? in good shape? how much? thanks
|
If you are talking about the dash pad on the passenger side, I do have it but it has a crack on the top just like every other one I have ever seen. Sorry.
If you are talking about the instrument cluster, I do have that. It is in good shape. This is an XL truck so no tach but all of the gauges are there and were functional when disassembled. Make offer. |
Is the bumper rust free?
|
Originally Posted by snaponprofile
(Post 9939439)
Is the bumper rust free?
This was just before he put the block heater plug in: http://i480.photobucket.com/albums/r...0/101_2145.jpg |
Sent you a pm.
|
Neal, I know that you said the truck is an xl, but I'm curious as to whether it has the fiberglass step boards.
|
All times are GMT -5. The time now is 03:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands